17 August 2022 in IEEE Transactions on Instrumentation and Measurement
We present a novel strain sensor based on a hybrid Fabry–Perot interferometer (HFPI), which is mainly constructed by a cascade of a suspended-core fiber (SCF) and a hollow-core fiber (HOF) between two single-mode fibers (SMFs). When the optical path length (OPL) is matched to some extent, the reflection spectrum of the proposed HFPI demonstrates dense periodic Fabry–Perot interferometer (FPI) fringes tailored with a widely expanded envelope, the dip or peak of which responds swiftly to the strain due to the Vernier effect and the strain response difference between the SCF and the HOF. Through optimizing the parameters, one can achieve a magnified strain sensitivity up to −91.41 pm/ $\mu \varepsilon $ ranging from 0 to $1800~\mu \varepsilon $ . The strain sensitivity is much higher than that of the single HOF FPI structure or the single SCF FPI structure. Moreover, a theoretical model has been established to explain the principle of the proposed HFPI based on the Vernier effect and the ways to further improve the sensitivity. By adding a fiber Bragg grating (FBG), the temperature can also be interrogated by demodulating the envelope peak of the HFPI and the peak of the FBG. The proposed structure has the advantages of high sensitivity, large dynamic range, temperature discrimination ability, and compact size, providing potential from personal human health perception to public structure health monitoring.
21 December 2020 in Journal of Lightwave Technology
A two-dimensional (2D) vector bending fiber sensor is demonstrated based on a femtosecond (fs) laser inscribed hybrid cladding waveguide (CWG) structure, which is mainly composed of two eccentric cladding waveguides distributed oppositely in a single mode fiber (SMF). The structure can enable light in the central core to efficiently couple into different CWGs under respective resonant conditions, thereby providing two separate local dips in response to the two CWGs in the transmission spectrum. When the bending is applied, the two CWGs will suffer asymmetric effective refractive index (RI) variation, resulting in that the wavelength shift for each dip differs significantly. The curvature sensitivity can be enhanced by tracking the wavelength interval between the two dips, reaching up to -14.25 nm/m-1 and +14.80 nm/m-1 at the 0° and 180° orientations ranging from 0 m-1 to 8 m-1, respectively. Featured with high sensitivity, large curvature range, 2D orientation identification, compact size, and reduced temperature crosstalk, the proposed structure offers the opportunity to be applied from public infrastructure health monitoring to wearable artificial devices.
3 September 2018 in IEEE Sensors Journal
We demonstrate a thin-core fiber (TCF)-based hybrid modal interferometer for high-sensitivity refractive index (RI) sensing. It mainly consists of a tapered TCF with an air bubble fabricated by the arc discharge technique using a fusion splicer machine. Due to mode mismatch and the tapering of the TCF, high-order cladding modes are excited, which can be used for high-sensitivity index sensing. The selected two interference dips of the sensor can obtain the index sensitivities of 370.37 and −72.22 dB/RIU in the RI range from 1.333 to 1.3799. Using the differential intensity demodulation method, a total index sensitivity as high as 442.59 dB/RIU can be achieved. Featured with high sensitivity, linear response, small size, ease of fabrication, and low cost, the proposed sensor may have various applications in biochemical sensing field.
18 March 2024 in IEEE Transactions on Instrumentation and Measurement
We reported a highly sensitive twist sensor based on a novel helical long period grating (HLPG), which was written in the core region of a single mode fiber (SMF) by a femtosecond (fs) laser. Due to the helical refractive index (RI) modulation with a small period (20 μm), the transmission spectrum exhibits multiple resonant dips, which are due to the resonant coupling between the fundamental core mode and multiple high order cladding modes, respectively. When the grating suffers from the torsion, the polarization state of the incident light and the inherent structure of the HLPG will change, leading to variations in the intensity of the dips with the twist angle. Since the selected dips of the optimized sample have distinct intensity response to the twist, the grating can achieve enhanced twist sensitivities of 18.93 dB/rad in the clockwise (CW) direction from 0° to 48° and -20.54 dB/rad in the counter-clockwise (CCW) direction from 0 ° to -48 ° by the differential intensity demodulation method. Furthermore, the machine learning method (MLM) has been exploited to analyze more resonant dips that have discrepant responses to the twist angle, enabling the enlargement of the sensing range and the discrimination of the twist direction. Featured with high torsion sensitivity, high resolution ( ~ 0.028 ° ), compact size, ease of fabrication, polarization dependent twist response and twist direction discrimination ability, the proposed structure has potentials from soft robotics to artificial textiles.
1 September 2026 in IEEE Sensors Journal
30 July 2025 in IEEE Sensors Journal
We presented a highly sensitive refractive index (RI) sensor based on a spiral long period fiber grating (SLPG), which was inscribed near the core region of a single mode fiber (SMF) by a femtosecond (fs) laser. Due to the refractive index modulation (RIM) with a period of 40 μm, the transmission spectrum exhibits multiple resonant dips that are corresponding to multiple high-order cladding modes with different orders. When the surrounding refractive index (SRI) of external medium is approaching to the cut-off band, the resonance valley will gradually become shallower from long wavelength to short wavelength owing to that the confinement of high order cladding modes is becoming weaker. For the selected dips, the proposed structure can achieve ultra-high RI sensitivities up to 3991.46 dB/RIU from 1.4292 to 1.4321 and 6006.67dB/RIU from 1.4329 to 1.4341, respectively. Moreover, since each dip responses differently with discrepant RI sensitivities and sensitive RI zones, the quasi-continuous property makes it possible for expanding the RI sensing range further. Featured with ultra-high RI sensitivity, high resolution, tunable RI response, robust structure, compact size, and ease of fabrication, the proposed structure has potentials from bio-chemical monitoring to bio-medical application.