16 May 2019 in Journal of Lightwave Technology
We demonstrate a proposed fiber optic sensor based on detecting the envelope of a Vernier microwave frequency comb (VMFC). A mode-locked fiber laser (MLFL) was employed as a microwave frequency comb source. A fiber ring, functioning as a sensor head as well as a microwave photonic filter, tailored the amplitude of each harmonic of the microwave frequency comb. By carefully designing the fiber ring length and the frequency separation of the microwave frequency comb, the Vernier effect is generated on the photodiode recovered microwave frequency comb after the laser pulses pass through the fiber ring. The sensing information can be deduced by tracking the envelope of the VMFC. The experimental results of a temperature sensing test show that the frequency shifts of the envelope peak have a good linear relationship with temperature variation. Furthermore, the sensitivity of the proposed sensor system is controllable.
1 February 2021 in Journal of Lightwave Technology
An integrated structure in the original single mode fiber (SMF) which can measure curvature and temperature simultaneously, is proposed and demonstrated. The key components of the device include an in-fiber Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG), which are integrally fabricated in a coating-unstripped SMF by femtosecond laser direct writing. The curvature sensing of the device is based on the wavelength shift of the MZI interference fringe dips. It is found that the bending response is closely related to the bending orientation. The measured curvature sensitivities are 2.324 and 2.491 nm/m -1 for the 0° and 180° orientation in the range of 0-10 m -1 , respectively. Under different bending states, the temperature response of the FBG resonant wavelength is almost the same and the mean temperature sensitivity is 9.72 pm/°. The advantages of compact, simple fabrication, low insertion loss, no assembly, wide operating range of curvature measurement and real-time temperature sensing make our device very attractive in practical engineering monitoring and somatosensory posture recognition.
6 April 2022 in Journal of Lightwave Technology
In this paper, a highly sensitive fiber Bragg grating (FBG) interrogation system based on a dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect has been proposed and experimentally demonstrated. Light reflected from the FBG sensor is used as the optical source of the OEO. By introducing dispersion in the OEO loop, the sensor information encoded in the FBG wavelength can be interrogated by detecting the frequency of microwave signal generated by the OEO loop. The dispersive media in OEO has two paths, one path is formed with a roll of dispersion compensation fiber (DCF), and the other path is formed with a roll of single-mode fiber (SMF). By designing the length of two paths with slightly difference, the Vernier effect is generated in the OEO. Since the dispersion of the two paths is opposite, an enhanced Vernier effect can be realized, which can significantly enhance the sensitivity. The experimental results prove the possibility of applying the concept of enhanced Vernier effect to the OEO for temperature sensing. The sensitivity is about 0.926 kHz/°C and 0.0912 kHz/°C for a single-loop OEO with DCF and SMF, respectively. By employing the enhanced Vernier effect, the sensitivity can be improved to 141.13 kHz/°C, which is estimated about 152.4 and 1547.5 times higher than that of the two single loops, respectively. Furthermore, sensitivity can be further improved by using a dispersive link with larger dispersion.
17 August 2022 in IEEE Transactions on Instrumentation and Measurement
We present a novel strain sensor based on a hybrid Fabry–Perot interferometer (HFPI), which is mainly constructed by a cascade of a suspended-core fiber (SCF) and a hollow-core fiber (HOF) between two single-mode fibers (SMFs). When the optical path length (OPL) is matched to some extent, the reflection spectrum of the proposed HFPI demonstrates dense periodic Fabry–Perot interferometer (FPI) fringes tailored with a widely expanded envelope, the dip or peak of which responds swiftly to the strain due to the Vernier effect and the strain response difference between the SCF and the HOF. Through optimizing the parameters, one can achieve a magnified strain sensitivity up to −91.41 pm/ $\mu \varepsilon $ ranging from 0 to $1800~\mu \varepsilon $ . The strain sensitivity is much higher than that of the single HOF FPI structure or the single SCF FPI structure. Moreover, a theoretical model has been established to explain the principle of the proposed HFPI based on the Vernier effect and the ways to further improve the sensitivity. By adding a fiber Bragg grating (FBG), the temperature can also be interrogated by demodulating the envelope peak of the HFPI and the peak of the FBG. The proposed structure has the advantages of high sensitivity, large dynamic range, temperature discrimination ability, and compact size, providing potential from personal human health perception to public structure health monitoring.
28 February 2019 in IEEE Photonics Technology Letters
6 November 2023 in IEEE Sensors Journal
We propose and experimentally demonstrate a sensitivity enhanced fiber Bragg grating (FBG) curvature sensing system based on optoelectronic oscillator (OEO) with the enhanced Vernier effect. In this paper, two FBGs with opposite wavelength shift directions are constructed by using the silicon plate, and the time delay of the two loops of OEO changes in opposite, thus realizing OEO based sensitivity enhanced FBG curvature sensing system with the enhanced Vernier effect. The experimental results show that the sensitivity of single FBG curvature sensing system based on single-loop OEO is about 0.067 MHz/m -1 , while the sensitivity of two FBGs based curvature sensing system employing dual-loop OEO with the enhanced Vernier effect is 40.89 MHz/m -1 , which is 612 times that of a single loop OEO based FBG curvature sensing system. Moreover, the proposed FBG curvature sensing system shows great temperature insensitivity characteristics, in which temperature sensitivity of the proposed curvature sensing system is 5.57 kHz/°C, and the curvature error caused by the change of 1 °C is 1.358×10 -4 m -1 , which shows potential for realizing high sensitivity, fast, real-time demodulation in temperature-insensitive FBG curvature sensing system.