Centre de Recherche en Automatique de Nancy/Centre National de la Recherche Scientifique Université de Lorraine, IUT Henri Poincaré de Longwy Cosnes‐et‐Romain France
Auto-generated profile, based on publicly available information
Abraham Jashiel PérEz Estrada
Centre de Recherche en Automatique de Nancy/Centre National de la Recherche Scientifique Université de Lorraine, IUT Henri Poincaré de Longwy Cosnes‐et‐Romain France
This paper deals with the design, construction, and instrumentation of a UAV experimental platform. It is formed by a mechanism and a UAV hexacopter. The mechanism allows the movement around of non-inertial frame of the vehicle while restricting the movement around of inertial frame. The UAV hexacopter is fixed to the mechanism and contains an IMU sensor to measure the angular position of the vehicle. The data acquisition, processing and compute of the control signals is developed on board the vehicle through a NI myRIO®. By considering the dynamical behavior of the UAV hexacopter, it can be divided in rotational and translational motion. The stabilization of the rotational dynamics is addressed in this work, where two control loops around the Euler angles roll and pitch are implemented and tested in the experimental platform. The development of the instrumentation and the construction of the experimental platform are presented to explain how the system measures the angular position around the non-inertial frame of the UAV. The main contribution of this work is the design of the experimental platform. The effectiveness and practicality to stabilize a UAV hexacopter are shown through experimental results.
30 July 2018 in International Journal of Systems Science
An observer-based method for actuator fault estimation for descriptor systems is presented. An innovative generalised dynamic observer for descriptor systems is synthesised to perform a convergent estimation of actuator faults. The main advantage of this observer is that it can be configured as a simple proportional observer or a proportional-integral observer, depending on the design specifications. An algorithm is provided to compute the observer gains, which are deduced from the stability analysis. Actuator faults occurring in a heat exchanger modelled in descriptor form are estimated in order to evaluate the capabilities of the observer.
This paper presents a new generalized dynamic observer (GDO) for quasi-linear parameter varying (LPV) systems. It generalises the structures of the proportional observer (PO) and proportional integral observer (PIO). The design of the GDO is derived from the solution of linear matrix inequalities (LMIs) and the solution of the algebraic constraints obtained from the estimation error analysis. The efficiency of the proposed approach is illustrated by a numerical example.
Observateurs adaptatifs des systèmes LPV : application à la commande et au diagnostic: Dans cette thèse, la conception d’observateurs pour les systèmes linéaires à paramètres variables (LPV) et leurs applications au diagnostic et à la commande tolérante aux fautes est étudiée. Un système LPV peut approcher le comportement dynamique non linéaire via un ensemble de modèles linéaire interpolés par un mécanisme dépendant de variables de planification. L’observateur utilisé dans cette recherche s’appelle l’Observateur Dynamique Généralisé (GDO), où l’idée principale est d’ajouter une structure dynamique pour augmenter ses degrés de liberté, dans le but d’obtenir une précision en régime permanent et d’améliorer la robustesse de l’erreur d’estimation contre les perturbations et les incertitudes paramétriques. Par conséquent, cette structure peut être considérée comme plus générale qu’un observateur proportionnel ou qu’un observateur proportionnel intégral. Le sujet traite de la synthèse de GDO pour les systèmes LPV avec des variables d’ordonnancement mesurées et non mesurées, telles que les systèmes quasi-LPV, dans lesquels les variables d’ordonnancement sont des fonctions de signaux endogènes (les états, les entrées ou les sorties), au lieu de signaux exogènes. Les conditions d’existence et de stabilité de chaque structure de GDO sont définies par l’approche de Lyapunov en utilisant une fonction de Lyapunov qui peut être indépendante dépendante des paramètres. La conception est obtenue en termes d’un ensemble d’inégalités matricielles linéaires (LMIs). Les applications d’ingénierie illustrent la performance et l’efficacité des approches proposées. Dans la dernière partie, une stratégie de commande tolérante aux fautes (FTC) pour les systèmes LPV polytopiques, afin de maintenir le système proche des performances souhaitées et de préserver les conditions de stabilité en présence de défauts d’actionneurs. Une unité de diagnostic des défauts est construite pour estimer les états, les défauts d’actionneurs et la variation des paramètres, ces informations sont essentielles à la loi FTC.