2 November 2020 in IEEE Electron Device Letters
In this letter, we proposed and experimentally demonstrated a metal-insulator-semiconductor (MIS) ferroelectric capacitor with non-volatile programmable capacitance. By switching the polarization of the Al-doped HfO2 ferroelectric insulator with the external electric field, the depletion width of the semiconductor can be modulated, leading to the continuously adjustable capacitance of the device. Due to the non-volatility of ferroelectricity, the programmed capacitance is stable without the constant DC bias. We also proposed some potential applications of the capacitor in the data storage and circuit design.
21 October 2021 in IEEE Electron Device Letters
We report the temperature-dependent operation of back-end-of-line (BEOL) compatible amorphous indium-gallium-zinc-oxide ( ${a}$ -IGZO) ferroelectric thin-film transistors (FeTFTs) with a large memory window (MW) more than 3 V. Our ${a}$ -IGZO FeTFTs have a metal–ferroelectric–metal–insulator–semiconductor (MFMIS) stru- cture with Zr-doped HfO 2 (HZO) as the ferroelectric layer. Characteristics of ${a}$ -IGZO FeTFTs are investigated in the temperature range of −40 °C to 100 °C. We found that: Firstly, the remanent polarization ( ${P}_{\text {r}}$ ) of the HZO film increases with $2{P}_{\text {r}}$ from $\sim 35~ {\mu }\text{C}$ /cm 2 at −40 °C to $\sim 40~ {\mu }\text{C}$ /cm 2 at 100 °C. Secondly, enhancement in MWs at high temperatures is observed, achieving MWs larger than 3.5 V when the temperature is higher than 60 °C. Thirdly, for the threshold voltage ( ${V}_{\text {TH}}$ ) at high temperatures, there is a competition between the negative shift caused by higher carrier concentration in the ${a}$ -IGZO channel and positive shift due to the charge trapping at the floating gate in the MFMIS structure. This could be explored to realize good ${V}_{\text {TH}}$ stability.
14 February 2023 in IEEE Transactions on Electron Devices
By modulating the capacitance to store data, ferroelectric capacitive memories (FCMs) show distinct advantages compared with the conventional resistive memories, including the near-zero static power, negligible read disturbance, and immunity to IR drop problem. However, the promise of FCMs requires the improvement of their electrical characteristics, including retention, capacitance ratio, and operation speed. In this work, by introducing a heavily doped region in the metal–ferroelectric–semiconductor (MFS) structure, we propose and experimentally demonstrate an inversion-type FCM device, which simultaneously achieves: 1) high ( $\times 125$ ) ${C}_{\text {HCS}}/{C}_{\text {LCS}}$ ratio; 2) ten-year retention under 85 °C; 3) multistate operation; and 4) improved write speed in nanosecond range. Integrating the devices on Silicon on insulator (SOI) substrates, we also realize the 1-kbit inversion-type FCM crossbar array. By setting up a test platform with a specially designed drive circuit, the read/write operation of the capacitive array is successfully demonstrated, evidencing the stable operation of the capacitive memory device in the array level.
3 November 2023 in IEEE Transactions on Electron Devices
Through careful design of the area ratio (AR) of the back-end-of-line (BEOL)-compatible metal–ferroelectric–metal–insulator–semiconductor (MFMIS) ferroelectric field-effect transistor (FeFET), we are able to modulate the charge injection in the gate-stack and successfully extend the memory window (MW) to $\sim$ 8 V, far beyond the theoretical limit of double coercive voltage ( Vc ) for the Fe layer within the gate-stack. Moreover, we have developed and demonstrated, for the first time, the BEOL-compatible antiferroelectric (AFe) FET with the same MFMIS structure by substituting the Fe Hf $_\text{x}$ Zr $_{\text{1-x}}$ O $_{\text{2}}$ (HZO) to Zr-rich AFe HZO. By adjusting the AR and channel thickness, either volatile or nonvolatile memory can be realized with the same structure. Meanwhile, the MW of anti-FeFETs (AFeFETs) up to $\sim$ 3 V further confirms the influence of the charging effect. Furthermore, we have validated the reliability of both Fe and AFeFETs, demonstrating decent endurance and retention time. As the operation voltage for AFeFETs can be smaller than their Fe counterparts, they hold great promise to achieve ultrahigh-endurance operation. We have even confirmed an endurance over 10 $^\text{9}$ cycles without apparent MW degradation and dielectric breakdown for the AFeFETs when operating with unipolar voltage.
14 July 2022 in IEEE Transactions on Electron Devices
We demonstrate nonvolatile and area-efficient ternary content-addressable memories (TCAMs) featuring amorphous indium–gallium–zinc–oxide (a-IGZO) ferroelectric field-effect transistors (FeFETs) with excellent electrical characteristics. An extremely large sensing margin of the TCAM array is achieved due to the large current ON/OFF ratio ( $I_{ \mathrm{\scriptscriptstyle ON}}/I_{ \mathrm{\scriptscriptstyle OFF}})$ of the a-IGZO FeFETs. Our Hf x Zr $_{\text {1-x}}\text{O}$ 2 (HZO)-based a-IGZO FeFETs have a metal–ferroelectric–metal–insulator–semiconductor (MFMIS) structure. By engineering the area ratio of the ferroelectric layer ( ${A}_{Fe}$ ) and the metal–oxide–semiconductor layer ( ${A}_{MOS}$ ), a large memory window (MW) of 2.9 V is realized. Reliability test results, including retention, endurance, and positive bias temperature instability, show long-term retention of more than ten years and high endurance of 10 8 cycles. In addition, by scaling the channel length down to 40 nm, ON current of $77 ~\mu \text{A}/ \mu \text{m}$ ( ${V}_{\mathrm{GS}} - {V}_{\mathrm{TH}}$ = 5 V and ${V}_{\mathrm{DS}}$ = 2 V) and ${I}_{ \mathrm{\scriptscriptstyle ON}} / {I}_{ \mathrm{\scriptscriptstyle OFF}}$ of more than eight orders can be obtained for the ultrascaled a-IGZO FeFETs while maintaining an MW of 2.8 V.
29 September 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
The rapid development of edge artificial intelligence (AI) raises high requirements for data-intensive neural network (NN) computing and storage of edge devices, under a limited chip footprint and energy supply source. As a promising approach for energy-efficient processing, computing-in-memory (CiM) has been widely explored in recent efforts to mitigate the data transmission bottleneck. However, CiM with small on-chip memory capacity results in expensive data reloads, limiting its deployment in large-scale NN applications. Moreover, the increased leakage under advanced CMOS scaling lowers the energy efficiency. In this work, device-circuit synergy based on the indium-gallium-zinc-oxide (IGZO) thin-film transistor (TFT) is adopted to address these challenges. First, 4-transistor-1-capacitor (4T1C) IGZO eDRAM CiM is proposed with higher density than SRAM-based CiM and enhanced data retention by both lower device leakage and a differential cell structure. Second, exploiting the back-end-of-line (BEOL) compatibility and vertical integration of emerging channel-all-around (CAA) IGZO devices, 3D eDRAM CiM is proposed, which paves the way for IGZO-based CiM with ultra-high density. Circuit techniques including time-interleaved computing and differential refresh are proposed to guarantee accuracy under large-capacity 3D CiM. As a proof of concept, a $128$ $\times$ $32$ CiM array is fabricated under a foundry low-temperature poly-crystalline and oxide (LTPO) technology, demonstrating high computing linearity and long data retention. Benchmarks on scaled 45nm IGZO technology show energy efficiency of 686 TOPS/W for array only, and 138 TOPS/W while considering peripheral overheads.