Zuopu Zhou

Zuopu Zhou

Auto-generated profile, based on publicly available information

Zuopu Zhou

Department of Electrical and Computer Engineering, National University of Singapore, Singapore

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
ZZZuopu Zhou
Zuopu Zhou
ZLZhiliang Liu
Zhiliang Liu
Because of its flexibility, high strength, and durability, steel wire rope (SWR) is widely used in irrigation works, bridges, harbors, tourism and many industrial fields as a vital component. Thus, it can cause accidents and economic losses if local flaws (LFs) of the SWR in service are not detected in time. This paper points out two major problems in magnetic flux leakage (MFL) imaging-based nondestructive testing for fault diagnosis of SWR and proposes an integrated signal-processing method specifically designed for addressing the two problems. In this paper, the MFL signals are collected by a detector that is formed by a set of permanent magnets and a Hall sensor array. Based on this multi-channel MFL signals obtained from the Hall sensor array, we use the principle of multi-channel signal fusion to mine rich information from all MFL signals. We solve the strand noise problem by an oblique-directional resampling and filtering method, which avoids severe attenuation in the LF signal. Moreover, the shaking noise is effectively removed by the proposed anti-shaking filtering based on the median filter. According to our simulation and experiment, the proposed fault diagnosis method for SWR significantly improves the performance of LF detection and localization under strong shaking and strand noises.

2 November 2020 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
ZZZuopu Zhou
Zuopu Zhou
Jiuren zhouJiuren zhou
Jiuren zhou
XWXinke Wang
Xinke Wang
HWHaibo Wang
Haibo Wang
CSChen Sun
Chen Sun
XGXiao Gong
Xiao Gong
In this letter, we proposed and experimentally demonstrated a metal-insulator-semiconductor (MIS) ferroelectric capacitor with non-volatile programmable capacitance. By switching the polarization of the Al-doped HfO2 ferroelectric insulator with the external electric field, the depletion width of the semiconductor can be modulated, leading to the continuously adjustable capacitance of the device. Due to the non-volatility of ferroelectricity, the programmed capacitance is stable without the constant DC bias. We also proposed some potential applications of the capacitor in the data storage and circuit design.

14 February 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZZZuopu Zhou
Zuopu Zhou
LJLeming Jiao
Leming Jiao
Jiuren zhouJiuren zhou
Jiuren zhou
ZZZijie Zheng
Zijie Zheng
YCYue Chen
Yue Chen
XGXiao Gong
Xiao Gong
By modulating the capacitance to store data, ferroelectric capacitive memories (FCMs) show distinct advantages compared with the conventional resistive memories, including the near-zero static power, negligible read disturbance, and immunity to IR drop problem. However, the promise of FCMs requires the improvement of their electrical characteristics, including retention, capacitance ratio, and operation speed. In this work, by introducing a heavily doped region in the metal–ferroelectric–semiconductor (MFS) structure, we propose and experimentally demonstrate an inversion-type FCM device, which simultaneously achieves: 1) high ( $\times 125$ ) ${C}_{\text {HCS}}/{C}_{\text {LCS}}$ ratio; 2) ten-year retention under 85 °C; 3) multistate operation; and 4) improved write speed in nanosecond range. Integrating the devices on Silicon on insulator (SOI) substrates, we also realize the 1-kbit inversion-type FCM crossbar array. By setting up a test platform with a specially designed drive circuit, the read/write operation of the capacitive array is successfully demonstrated, evidencing the stable operation of the capacitive memory device in the array level.

14 March 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
GLGan Liu
Gan Liu
QKQiwen Kong
Qiwen Kong
DZDong Zhang
Dong Zhang
XWXiaolin Wang
Xiaolin Wang
ZZZuopu Zhou
Zuopu Zhou
XGXiao Gong
Xiao Gong
In this article, we report a comprehensive investigation and a deep understanding of the impact of hydrogen evolution on the reliability of indium-gallium-zinc-oxide (IGZO) field-effect transistors (FETs) with HfO2 as the gate dielectric. Our findings reveal that the source/drain (S/D) regions play a pivotal role in the threshold voltage shift ( $\Delta {V}_{\text {th}}{)}$ observed under negative bias stress (NBS) conditions, with short channel (SC) devices exhibiting greater susceptibility to S/D effects compared to long channel (LC) devices. These observations are further supported by TCAD simulations. We combined NBS and positive BTI (PBTI) measurements to comprehensively assess the stress and recovery performance of the devices. This has allowed us to distinguish two distinct hydrogen (H) states, namely $\text{H}^{\text {P}}$ and $\text{H}^{\text {N}}$ , both of which induce a negative $\Delta {V}_{\text {th}}$ as a result of increased channel carrier concentration. This investigation advances our understanding of the fundamental physical mechanisms underlying the bias temperature instability (BTI) degradation in IGZO FET technologies.

2 November 2025 in Advanced Materials
Verified
Journal Article
Open access
ZZZuopu Zhou
Zuopu Zhou
LLLingqi Li
Lingqi Li
YFYang Feng
Yang Feng
XWXiaolin Wang
Xiaolin Wang
ZZZijie Zheng
Zijie Zheng
XGXiao Gong
Xiao Gong
The emergence of HfO 2 ‐based ferroelectric materials has revolutionized ferroelectric memory technologies, which overcome several key challenges of conventional ferroelectric materials and exhibit outstanding performance, aligning with the surging demands from data‐centric computing. In this review, a comprehensive overview of recent developments in HfO 2 ‐based ferroelectric memories is provided, spanning materials research, device engineering, integration strategies, and emerging applications. At the material level, advances in thickness and grain size scaling are discussed, as well as the investigation on polarization switching dynamics and cryogenic behavior. On the device front, progress is examined in ferroelectric field‐effect transistors (FeFETs), including alternative channel materials and gate stack designs, as well as novel device concepts beyond traditional FeFET architectures. Integration strategies to realize high‐density, high‐bandwidth memories, including the 3D stacking architectures and monolithic integration with logic transistors, are also reviewed. Finally, applications are explored that extend beyond conventional data storage. Through this multi‐faceted review, the aim is to identify both the technological opportunities and remaining challenges associated with HfO 2 ‐based ferroelectric memories, with the goal of inspiring further innovations in this emerging field.

3 November 2023 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZZZijie Zheng
Zijie Zheng
LJLeming Jiao
Leming Jiao
DZDong Zhang
Dong Zhang
CSChen Sun
Chen Sun
ZZZuopu Zhou
Zuopu Zhou
XGXiao Gong
Xiao Gong
Through careful design of the area ratio (AR) of the back-end-of-line (BEOL)-compatible metal–ferroelectric–metal–insulator–semiconductor (MFMIS) ferroelectric field-effect transistor (FeFET), we are able to modulate the charge injection in the gate-stack and successfully extend the memory window (MW) to $\sim$ 8 V, far beyond the theoretical limit of double coercive voltage ( Vc ) for the Fe layer within the gate-stack. Moreover, we have developed and demonstrated, for the first time, the BEOL-compatible antiferroelectric (AFe) FET with the same MFMIS structure by substituting the Fe Hf $_\text{x}$ Zr $_{\text{1-x}}$ O $_{\text{2}}$ (HZO) to Zr-rich AFe HZO. By adjusting the AR and channel thickness, either volatile or nonvolatile memory can be realized with the same structure. Meanwhile, the MW of anti-FeFETs (AFeFETs) up to $\sim$ 3 V further confirms the influence of the charging effect. Furthermore, we have validated the reliability of both Fe and AFeFETs, demonstrating decent endurance and retention time. As the operation voltage for AFeFETs can be smaller than their Fe counterparts, they hold great promise to achieve ultrahigh-endurance operation. We have even confirmed an endurance over 10 $^\text{9}$ cycles without apparent MW degradation and dielectric breakdown for the AFeFETs when operating with unipolar voltage.