The electric power industry is faced with the challenges of mitigating climate change, maintaining low electricity prices, and satisfying high reliability requirements for power supply.
20 January 2023 in IEEE Transactions on Power Delivery
Parallelization allows accelerating the computation of Electromagnetic Transients (EMTs). It can rely on the natural propagation delay of transmission lines (line-delay) to decouple a network into sub-networks without any loss of accuracy. Other techniques have to be used when there is no line-delay available. This paper presents one of them, using the Compensation Method (CM). This method is applied to decouple and parallelize real-time EMT simulations. The main novelty towards previous works is the introduction of an iterative version of CM to handle nonlinearities. The performance and accuracy of CM is studied through test cases, including practical distribution and High Voltage Direct Current (HVDC) networks. Hardware-In-the-Loop (HIL) setups with Line-Commutated Converters (LCC) and Voltage Source Converters (VSC) are used to test the iterative CM on practical real-time nonlinear cases.
Summary form only given. A Modular Multilevel Converter (MMC) control system based on converter energy storage is proposed in this paper for two different control modes: active power and dc voltage. The proposed control system decouples the sub-module (SM) capacitor voltages from the dc bus voltage. One of the practical applications is the management of active redundant SMs. A practical HVDC system with 401-level MMCs including 10% redundancy in MMC SMs, is used for validating and demonstrating the advantages of the proposed control system. This paper also presents a novel capacitor voltage balancing control based on max-min functions. It is used to drastically reduce the number of switchings for each SM and enhances computational efficiency.
16 April 2024 in IEEE Transactions on Power Delivery
This paper presents a study on a ±320 kV voltage source converter (VSC)-based high-voltage direct current (HVDC) cable system. The typical topology of Modular Multilevel Converter (MMC) is used in the modeling of VSCs. The evaluation of DC cable parameters is based on the classical method (CM) and recently proposed new Line/Cable-Data (LCD) module in an existing EMT-type simulation tool. The current transformation matrix, propagation constant and absolute value of input impedance on DC cable in frequency and modal domains are calculated and investigated. Moreover, transient simulations of the ±320 kV VSC-HVDC cable system are studied. The influences of various methods, bundle configurations, length and grounding resistances of the DC cable on transient simulations are made clear. The new findings in this paper can serve as new references for EMT simulation for future cable dominated VSC-HVDC power systems.