1 April 2024 in International Science Journal of Engineering & Agriculture
Даним теоретичним дослідженням розглядається можливість встановлення в очищувач повітря з фільтрувальними вставками НЕРА 11 секції нагріву санітарної норми повітря ззовні. Вказана секція планується до розміщення в середині рециркуляційної частини повітроочищувача. Розрахункова продуктивність рециркуляційної частини прийнята в кількості 800 м3/годину. Така кількість повітря дозволяє нагріти свіже повітря з вулиці, використовуючи теплообмінник без додаткового нагріву. За рахунок рециркуляції повітря, що очищається, без використання енергії на нагрів: велика кількість повітря, що очищається в рециркуляційній камері повітроочищувача, дозволяє нагріти визначений об’єм повітря з вулиці, при цьому температура повітря ,що рециркулює в кімнаті знизиться лише на 2С, з початкової температури в 20С до 18С. Таким чином, представлена модель дозволить економити більше 500Вт в годину на нагрів зовнішнього повітря, при цьому забезпечивши приміщення необхідною кількістю свіжого повітря для дихання в кількості визначеної як санітарна норма для дихання однієї людини з компенсацією рівні викидів CO2 людьми в різних контрольованих умовах під час сидячої діяльності. В даному випадку, використання фільтрувальної вставки типу НЕРА11 в поєднанні з високою кратністю повітрообміну, що становить більше 14 крат, дозволяє отримати мінімальну ефективності очищення повітря в приміщення до 95 % від початкового забруднення від респіраторних та інших забруднювачів повітряного середовища. Визначено необхідні параметри теплообмінника та габаритні розміри самого теплообмінника. Робота приладу розрахована на періодичну дію: при знаходженні людини в кімнати, при необхідності провітрювання чи компенсації витяжного повітря від роботи інших витяжних систем невеликої потужності. Всі теоретичні розрахунки потребують перевірки в натурних умовах.
11 February 2024 in Ventilation, Illumination and Heat Gas Supply
In the context of a constant increase in air pollution, the question arises of creating safe air zones with quality control of the air environment in places where people stay. The constant deterioration of air quality caused by military operations and their consequences, as well as the need to reduce the consumption of available energy resources, requires studying the recommendations on the optimal air exchange rate of existing European and American air quality requirements in residential and office buildings to achieve the required air quality with minimal energy consumption. The objectives of the study were to obtain data on the efficiency of air purification in a given volume at different air exchange rates. A separate task was to check the data declared by the manufacturer on the pressure drop across the filter with an increase in the volume of air passing through it. CleanZone5300 filtration systems with F9 class filter and HEPA H12/13 class filter were considered, which can provide an air exchange rate of 2 to 10 times. In a room volume of 225.9 m3, at a temperature of 18 ˚C, a relative humidity of 57-59 % and an initial number of particles in the room air of 533,440 particles/ft3 (15105 particles/m3), the ability of filtration units to purify the air at different rates was studied. It was concluded that even with a factor of 2, the filtration system can provide air purification up to 40 % when using the F9 filter and up to 60 % when using the HEPA H12/13 filter in a short period of time. Recirculation filter units are considered as the easiest way to increase the air exchange rate in the room, in our climatic conditions. With the possibility of avoiding the processing of air for heating or cooling when using outside atmospheric air. In the installations used in the study, the electrical power consumption of the fans is 300 W per hour. The conclusions of the study need to be tested in office premises with an existing ventilation system to determine the optimal multiplicity of achieving a given air quality when using filters or portable filter units.
1 October 2024 in International Science Journal of Engineering & Agriculture
Дослідження спрямоване на розробку повітроочисника з додатковою функцією підігріву повітря. В дослідженні розглядаються теплообмінні процеси в теплообміннику нагріву зовнішнього повітря типу «повітря-повітря» в рециркуляційній секції установки очищення повітря, що комплектується фільтрувальними вставками НЕРА 11. Розрахунки дійсні для установок очищення повітря рециркуляційного типу з продуктивність очищення в рециркуляційній частині в кількості від 300 до 1000 м3/годину. Кількість повітря, що очищається в рециркуляційній секції повітроочищувача, дозволяє нагріти визначений об’єм повітря з вулиці, при цьому очікувана температура повітря, що рециркулює в кімнаті знизиться лише на два градуси, з початкової температури в 20С до 18С. Методом проведення повного факторного експерименту визначено рівняння регресії, що описує прогнозування температури холодного теплоносія на виході з теплообмінника та коефіцієнту тепловіддачі теплообмінника. Адекватність рівняння регресії підтверджено статистичним аналізом. Визначена дійсна об’ємна витрата холодного теплоносія при середній дійсній швидкості в трубках, по яким рухається холодний теплоносій та різниця температур холодного теплоносія на вході в теплообмінник та на виході із нього. Виходячи з цих значень визначено тепловий потік, що сприймається холодним теплоносієм від гарячого теплоносія. Визначено коефіцієнт тепловіддачі експериментально спрощеним методом для стаціонарного режиму теплообміну. Даним дослідження підтверджена доцільність використання теплообмінника нагріву зовнішнього повітря типу «повітря-повітря» в рециркуляційній секції установки очищення повітря (повітроочисника) для нагріву зовнішнього повітря без використання додаткової енергії. Повітроочисник має періодичний характер роботи та застосовується при потребі.
6 May 2025 in Ventilation, Illumination and Heat Gas Supply
The results of a study aimed at developing a comprehensive solution for creating a safe air environment in residential and office premises are presented. An algorithm of actions has been developed, including administrative and hardware components, to ensure high efficiency of air purification and energy saving. The results of the study of the effectiveness of the "filter-heat exchanger" model aimed at simultaneously improving the quality of indoor air and reducing energy consumption are presented. A device has been developed and experimentally tested that provides savings of more than 500 watts per hour by using an air-to-air heat exchanger, where heat transfer occurs without additional heating of external air. A new method for determining the Nusselt number for heat exchangers of this type is proposed, based on the study of heat exchange during the transverse flow of both a separate pipe and a bundle of pipes in the range of Reynolds number 700 < Re < 3500. The study confirms the high efficiency of the air purification system, based on the use of a HEPA H11 filter and high air exchange rate, providing a minimum air purification efficiency of up to 95% of the original pollution. It is shown that increasing the volume of treated air significantly increases the cleaning speed, and each increase in the air exchange rate per unit reduces the cleaning time.
25 July 2024 in Ventilation, Illumination and Heat Gas Supply
Technical data on the effectiveness of air purifiers are usually obtained in laboratory conditions in special aerosol stands with test chambers or boxes of a small volume, while in real conditions the purifiers are used in rooms with a volume of at least 40-60 m3 with a permanent presence of people (distribution respiratory diseases emitted with breathing) and entry of PM2.5..PM10 particles into the room from working equipment (printers, chargers, power tools, etc.). There are already enough scientific materials on this matter, which prove that the actual efficiency of air purifiers in real conditions is much lower than the data given by the manufacturers. Therefore, there is a need to determine the optimal performance of the air purifier in real conditions in order to achieve the WHO recommended levels of safe indoor pollution with a maximum time interval of 1 hour, besides, taking into account that the air outside has a higher level of pollution with particles of PM 2.5. In this study, we strive to obtain a PM 2.5 value of 5 μg/m3 with a PM2.5 level in the air outside of 16.7 μg/m3. The calculated value of CADR for light pollution should be at least half of the power of the air purifier for the projected cleaning duration of no more than 1 hour. A smaller value of CADR leads to further accumulation of pollutants, which reduces the work of the cleaner. In this study, the value of CADR was at L=100 m3/hour the value of CADR= 59 m3/hour with the efficiency of filter inserts in 73% and natural sedimentation of particles in 25%, and at L=310 m3/hour the value of CADR= 59 m3/hour at efficiency of filter inserts in 94% and natural sedimentation of particles in 18%. The process of natural deposition and the amount of external pollution do not allow to clean the air without the use of mechanical filtration for any of the pollutants specified in the study.
3 July 2025 in Energy Technologies & Resource Saving
Air purifier model with built-in air-to-air heat exchanger was investigated. A complete factor experiment, orthogonal and rotatable planning for two- and three-level ratio of factors was carried out. A statistical analysis of the experiment was carried out. Found the most accurate mathematical model that allows you to predict the values of the parameters of the state of the object Y and optimize its parameters in further studies depending on the factors Xi. Based on the obtained data, the design of the filter-heat exchanger with the heat exchange part built into the air cleaner is modeled. Conducted experimental studies in the filter-heat exchanger. The description of the experimental stand and methods of experimental research are given. The cleaning capacity of the filter-heat exchanger for the removal of various levels of PM2.5 pollution with the change of some parameters of the internal air environment (relative humidity, air exchange rate) per unit time is determined. Experimentally determined value of air cleaner Clean Air Delivery Rate for the predicted cleaning duration is not more than 1 hour. The regression equations for various cleaning parameters are determined by which the cleaning time will be determined with known input data (pollution levels, relative humidity, air cleaning performance). Forecasting can be used in smart home systems, in enterprises and in ventilation and air conditioning systems. Bibl. 21, Fig. 7, Tab. 2.