7 January 2008 in Applied Physics Letters
We have fabricated single crystal-like (BFO) thin films by flux-mediated epitaxy using pulsed laser deposition (PLD). The Bi–Cu–O flux composition and its thickness were optimized using composition spread, thickness gradient, and temperature gradient libraries. The optimized BFO thin films grown with this technique showed larger grain size of and higher dielectric constant in the range of 260–340 than those for standard PLD grown films. In addition, the leakage current density of the films was reduced by two orders of magnitude compared to that of standard PLD grown films.
1 January 2007 in Journal of Applied Physics
We report on multiphase thin film growth of the Bi-Mn-O system on SrTiO3 (100) substrates. By varying the deposition oxygen partial pressure, the dominant phase formed in the film can be continuously changed from single phase epitaxal multiferroic BiMnO3 to epitaxally grown ferromagnetic Mn3O4. X-ray diffraction and transmission electron microscopy revealed that epitaxial multiferroic nanocomposites consisting of BiMnO3 and Mn3O4 form when the deposition pressure is ≈10 mTorr. The magnetic properties of the films were found to change as a function deposition pressure in a manner consistent with the variation in the nanocomposite microstructure.
11 December 2018 in Earth, Planets and Space
In 2014, a phreatic eruption occurred at the Ontake Volcano in Central Japan causing multiple deaths and missing persons. Interferometric Synthetic Aperture Radar data showed local-scale subsidence around the newly created eruptive vents after the eruption. Source modeling resulted in a nearly spherical deflation source emplaced at a depth of 500 m below the vents reflecting post-eruptive depressurization in a shallow hydrothermal reservoir. The cumulative deflation volume reached 7 × 105 m3 3 years after the eruption. Comparison between our source model and GNSS data indicates that this shallow reservoir could have formed by 2007 and remained stable until the 2014 eruption. The absence of significant syn-eruptive subsidence indicates that the shallow reservoir was not the main water source driving the phreatic eruption. Under simple assumptions, mass balance between the shallow reservoir and the discharge plume from the vents indicates most of the water contained in the plume comes from greater depth than the shallow reservoir. To constrain the post-eruptive process, it is necessary to track not only deformation but also plume discharge for 3 years after the eruption.