The Facet finite-element method (FFEM) requires a source field solution that is commonly obtained by the Biot-Savart (BS) equation that can be time-consuming. The subproblem modeling is applied to the FFEM in order to minimize the computational effort and time necessary to obtain the solution. The volume sources, which allow solving the BS equation only along the active regions, are presented, as well as the BS boundary condition correction.
1 December 2004 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
The sliding-surface and moving-band techniques are introduced in frequency-domain finite element formulations to model the solid-body motion of the rotors in an cylindrical machine. Both techniques are compared concerning their feasibility and computational efficiency. A frequency-domain model of a capacitor motor is equipped with a sliding surface and compared to a transient model with moving band. This example illustrates the advantages of frequency-domain simulation over transient simulation for the simulation of steady-state working conditions of electrical machines.
6 November 2008 in IET Science, Measurement & Technology
Accurate magnetic flux distributions are calculated in magnetic circuits via a subproblem finite-element (FE) method based on a perturbation technique. An approximate FE problem considering ideal flux tubes is first solved. It gives the source for FE perturbation problems considering the flux tubes with their exterior regions, accounting thus for leakage fluxes, as well as for changes of material properties and shapes. The proposed technique aims to accurately quantify the gain given by each model refinement on both local fields and global quantities and to justify the usefulness of this refinement. It is also well adapted to parameterised analyses on geometrical and material data.
3 September 2015 in IEEE Transactions on Magnetics
The aim of this paper is to compare several domain decomposition schemes for nonlinear, coupled electromechanical problems. Both staggered and monolithic electrostatic/elastic formulations are considered for the multiphysics problem. The domain decomposition is applied either to a single multiphysics iteration, which corresponds to a linear problem, or to the full nonlinear multiphysics resolution. In the latter, the problem solved at each domain decomposition iteration is nonlinear. The influence of the elastic wave's frequency and the electrostatic potential on the convergence rate and the computational cost of the algorithm is investigated on a 2-D model of a vibrating micromembrane array.