30 October 2024 in Natural and Engineering Sciences
Hybrid fibers are crucial in the self-propelled vehicle industry, with bamboo-glass fiber composites playing a significant role. Bamboo fibers, in particular, feature numerous tiny gaps that enhance their properties and performance. Hence there is a possibility for the absorption of moisture content from the atmosphere when compared to the relevant fibers. These setbacks can be rectified in various ways. Apart from that these fibers are very friendly to echo systems, can degrade quickly, and are flexible in their property. The major drawbacks of most of the fibers are, that they get easily affected by bacteria and fungus when they get soaked and wetted. But as far as the bamboo fibers are concerned they have a high resistance to these attacks. Therefore these materials can be preferred for external use such as engine guards of vehicles. The bamboo fiber in the glass hybridized polyethylene composite is alkali-treated to enhance the adherence of these materials. The high interpenetration of the resin into the fiber surface reduces the contact of this fiber especially the bamboo’s direct reach to the atmosphere. In this work, this hybrid material is preferred for doing a two-wheeler engine safety guard or a protective cover to protect the engine from the external natural compressive or the tensional forces acting on the engine when moves forward along with the vehicle. So, there is a necessity for measuring the flexural strength of the material, whether it will be suitable for this assigned work and also the stiffness of the material is obtained through the flexural modulus curve. Apart from this though these materials are placed in the outdoor sector, these materials can get in contact with external climatic conditions such as rain, dust, and moisture due to cold climatic conditions. This leads to the need for conducting the water absorption test. The test was conducted separately to obtain the water absorption coefficient as well as flexural test before and after water absorption to obtain any deviation if any after water absorption. The test was conducted in the open atmosphere at room temperature for both water absorption and flexural test. The results were tabulated and compared. The comparative study shows that only negligible deviation in property due to water absorption of the hybrid composite is observed.
25 July 2026 in International Research Journal of Multidisciplinary Technovation
Natural fiber–reinforced polymer composites are emerging as viable alternatives to synthetic materials, especially in heat- and fire-resistant applications, due to increasing environmental consciousness and the need for biodegradable options. Eco-friendly epoxy composites reinforced with 20 wt. % alkali-treated Prosopis juliflora fibers and Mg(OH)₂/TiO₂ nanofillers (2–6 wt.%) were fabricated using the hand lay-up method to enhance mechanical, thermal, fire-retardant, and moisture resistance properties. XRD analysis confirmed increased crystallinity after alkali treatment (71.86% to 72.98%), indicating removal of amorphous constituents, while FTIR spectra validated improved interfacial compatibility. SEM micrographs revealed enhanced fiber–matrix adhesion and minimal void formation at 4 wt. % filler loading, whereas 6 wt. % caused nanoparticle agglomeration. The optimum composition exhibited a tensile strength of 64.60 MPa (30.29% improvement) and flexural strength of 21.89 MPa (54.86% improvement) compared to the control (49.58 MPa). Impact strength increased to 21.67 kJ m⁻² (71.2% enhancement). Cone calorimetry demonstrated a reduction in peak heat release rate from 420 kW m⁻² to 402 kW m⁻² (4.3% reduction), while the burning rate decreased below 35 mm min⁻¹ for nanoparticle-filled composites. TGA results showed improved onset degradation temperature up to 348.6 °C and increased char residue to 11.5%. Water absorption decreased by up to 8.18% due to the barrier effect of nanofillers. The synergistic incorporation of Mg(OH)₂ and TiO₂ significantly improved multifunctional performance, making the composites suitable for lightweight structural and fire-resistant applications.
29 October 2026 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Friction stir welding (FSW) and friction stir processing (FSP) use frictional heat and intense plastic deformation from a rotating tool to join or modify materials without melting them. Joint strength and microstructure depend on many interacting variables, including rotational and traverse speeds, axial force, tool design, tilt angle, number of passes and, for surface composites, reinforcement content. Classical design of experiments methods are therefore increasingly being complemented, or replaced, by machine learning (ML). This review surveys ML applications in FSW and FSP, covering process modelling, parameter optimisation, prediction of mechanical and microstructural properties, defect identification and physics-informed and interpretable methods. Artificial neural networks, tree-based ensembles and hybrid models predict tensile strength, hardness, wear rate and friction coefficient with high accuracy and one study on high-entropy-alloy-reinforced composites reports coefficients of determination above 0.96. Deep-learning models for defect classification exceed 90% accuracy on benchmark radiographic datasets. The main obstacles are scarce and inconsistent experimental data, weak generalisation across alloys and tool types, limited interpretability and little industrial deployment. Shared benchmark datasets, physics-informed and explainable models and systems capable of real-time control are identified as priorities for future work.
10 June 2026 in Surfaces and Interfaces