2 December 2014 in Journal of Electronic Materials
Design of practically realizable unipolar HgCdTe nBn photodetectors has been studied in detail by numerical analysis. The simulations reported herein reveal that, by optimization of barrier doping, dark current levels can be reduced and collection efficiency substantially improved. It is shown that p-type doping of the barrier layer can significantly reduce the effective potential barrier arising from the valence band offset between the absorber and barrier regions, thus enabling HgCdTe nBn detector operation under near zero-bias conditions. However, relatively high electric fields in the space charge regions near the barrier/absorber interface result in enhanced trap-assisted Shockley–Read–Hall thermal generation. Our calculations indicate that nBn HgCdTe detectors with barriers engineered by use of HgTe/Hg0.05Cd0.95Te superlattices have, potentially, substantially better valence band alignment without the need for p-type doping.
27 March 2012 in Semiconductor Science and Technology
31 January 2013 in Optical Engineering
The performance of midwavelength infrared type II superllatice InAs/GaSb PIN and nBn (AlGaSb barrier) photodetectors in a reverse bias voltage range and a temperature range from 77 to 240 K is described. The PIN and nBn structures are modeled by a bulk based model, i.e., type II superllatice is treated as an artificial semiconductor material where parameters describing its physical properties are extracted from the experimental data. The model assumes that position of the effective trap energy level depends on temperature, what allowed to obtain a very good fitting to the measurements. Temperature and bias dependent dark current and differential resistance area product of the both devices have been analyzed to investigate contributing mechanisms such as: diffusion, generation-recombination, band-to-band and trap-assisted tunneling that limit the electrical performance of both types of the detectors. The and product characteristics of both types of type II superllatice InAs/GaSb photodetectors were found to be dominated by diffusion and generation-recombination currents in the nearly zero-bias region. At medium values of reverse bias, the trap-assisted tunneling reveals its significance, while at higher reverse voltages—the band-to-band tunneling is decisive to and characteristics. The fitting procedure allowed to extract both generation-recombination and diffusion components of carrier lifetimes pointing out that the carrier lifetimes range from 2 to 10 ns at . Detectivity for and was estimated to be and for PIN and nBn detector, respectively. Finally, type II superlattice InAs/GaSb PIN and nBn structures’ performance is compared to both unipolar barrier nBn HgCdTe detector and bulk HgCdTe photodiodes operated at near-room temperature. It is shown that the performance of SL and HgCdTe photo detectors with a cut-off of about 5 μm is comparable at operation temperatures around 240 K.
5 October 2015 in Semiconductor Science and Technology
In this report, we present results of an experimental investigation of a near mid-gap trap energy level in InAs 10 ML /GaSb 10 ML type-II superlattices. Using thermal analysis of dark current, Fourier transform photoluminescence and low-frequency noise spectroscopy, we have examined several wafers and diodes with similar period design and the same macroscopic construction. All characterization techniques gave nearly the same value of about 140 meV independent of substrate type. Additionally, photoluminescence spectra show that the transition related to the trap centre is temperature independent. The presented methodology for thermal analysis of dark current characteristics should be useful to easily estimate the position of deep energy levels in superlattice photodiodes.
6 May 2015 in IEEE Transactions on Electron Devices
The role of generation-recombination (g-r) and diffusion currents in the generation of 1/f noise was investigated in mid-wavelength infrared detectors with InAs/GaSb superlattice (SL) absorber. Modeling of the dark current reveals the region where g-r and/or diffusion currents dominate over the leakage current (shuntand/or trap-assisted tunneling). Measurements of 1/f noise at constant reverse bias versus temperature show that noise intensity follows squared leakage current. There is no contribution to 1/f noise from g-r or diffusion currents or it is too small to be observed. This property should be attributed to InAs/GaSb SL material rather than to device specific features, since the batch of examined devices contained specimens with various architecture, passivation method, and substrate. Results for SL-based devices were compared with the state-of-the-art HgCdTe detectors. In these detectors, dedicated for high operating temperature, correlation between g-r/diffusion currents and 1/f noise is significant.