A 3D printer was used to realize custom-made diffractive THz lenses. After testing several materials, phase binary lenses with periodic and aperiodic radial profiles were designed and constructed in polyamide material to work at 0.625 THz. The nonconventional focusing properties of such lenses were assessed by computing and measuring their axial point spread function (PSF). Our results demonstrate that inexpensive 3D printed THz diffractive lenses can be reliably used in focusing and imaging THz systems. Diffractive THz lenses with unprecedented features, such as extended depth of focus or bifocalization, have been demonstrated.
9 February 2015 in IEEE Transactions on Terahertz Science and Technology
THz beam shaping via a single diffractive optical element is used to convert a divergent beam into a focal line segment perpendicular to the optical axis. The novel structure was designed for narrowband applications as a kinoform element and we successfully applied it in active, high-speed, THz linear scanners. The theoretical approach and experimental results are presented.
We investigated six prospective explosive materials in the terahertz range using time-domain spectroscopy. A family of energetic azotetrazolate salts and two caged nitramines were studied. A number of distinct spectral features were observed in the 0.8–3.2 THz frequency range. In transmission configuration in ambient temperature, we determined the absorption coefficient and the refractive index of the materials, which were compressed as pellets. Because the visibility of some absorption peaks was not clear, additionally we performed characterization of these materials in a temperature range from to 0°C, which resulted in highlighting peaks with low amplitude. Because the considered explosives are insensitive to compression, we also measured them using an attenuated total reflection (ATR) technique, in which sample preparation is easier than with pressed pellets. The absorption peaks measured by ATR agree well with those determined in transmission. This suggests that ATR also can be used for identification of these classes of materials.
We discuss thin optical structures that allow chromatic aberrations to be avoided in the THz domain. The paper contains the theoretical considerations, computer modeling and experimental evaluation of the high order kinoform diffractive elements in the THz range. According to the obtained results application of the high order kinoforms enables broadband operation in the THz range.
We built a high-speed TDS setup with the use of electronically controlled optical sampling (ECOPS), which can measure up to 1600 terahertz pulses per second. The movement of the sample was provided by two fast-speed motorized linear stages constituting the gantry. We developed a flat-bar-based metal marker approach for the synchronization of continuous line-by-line scans. We carefully compared the performance of the terahertz reflection time-domain spectroscopy (TDS) scanner operating in a slow point-by-point and a one-hundred-times faster line-by-line imaging scheme. We analyzed images obtained for both schemes for a uniform metallic breadboard with holes, as well as a glass composite sample with defects. Although the measurement time was reduced by 100 times in terms of the line-by-line scheme, the overall performance in both schemes was almost identical in terms of the defects’ sizes, shapes and locations. The results proved that the proposed ECOPS TDS system can provide uniform and extremely fast scanning without any deterioration in image quality.