30 December 2018 in Journal of Sensors
Terrain matching positioning is a promising method to overcome the problem that the inertial navigation error of the underwater vehicle accumulates over time. In the conventional terrain matching method, all measurement points are commonly used for matching and positioning. However, this method fails to be taken into a balanced consideration on both the computation complexity and the positioning accuracy. To reduce the computation and ensure the accuracy at the same time, an improved terrain matching method based on the gradient fitting is proposed in this paper. In the method, the gradient distributions of multiple terrain regions are firstly analyzed. Then, normal distribution is used to fit them, and according to the distribution, points with larger gradient values are selected as matching points. Finally, minimum absolute difference matching is chosen to match for positioning. Simulation results using multibeam sonar show that the improved terrain matching localization method not only reduces the computational complexity but also improves the accuracy of positioning.
20 July 2022 in Measurement Science and Technology
Inertial navigation systems (INSs) are widely used for autonomous underwater vehicle navigation, with excellent short-term precision. However, the positioning error of an INS accumulates with time. It is imperative to adopt other approaches to mitigate drift errors, especially for long-term sailing tasks. To that end, underwater terrain-based navigation (TBN) is effective in bounding the drift errors. In particular, the particle filtering (PF) method is extensively employed in TBN to tackle the highly nonlinear measurement equation. In our previous work, the statistical properties of the digital terrain model gradient were exploited and we proposed the use of three probability density functions to characterize the normalized data, i.e. Gaussian, gamma and Weibull distributions. In this paper, the likelihood was modified according to the gradient fitting results, i.e. an optimal distribution selection. Moreover, to prevent the measurement data with large gradients from generating particles with lower weights, a pre-screen procedure was proposed to stabilize particle filter sampling. As shown and demonstrated in simulations, our proposed improved PF method outperforms the comparative ones in terms of root mean square error and standard deviation, as well as accuracy, especially for long-term sailing tasks. In terms of computational cost, a smaller number of measurement data are employed and the proposed method is faster than the standard PF method.
20 October 2025 in IEEE Transactions on Instrumentation and Measurement
The background of the active sonar deviates far from the Rayleigh model when encountering reverberation or clutter, which causes unexpected false alarm rates in conventional detectors. Especially for the low-frequency active sonar, due to its relatively low measurement resolution, there are relatively few features that can be utilized for target recognition. In this article, a Joint-Distribution (Joint-D) based fitting method is proposed for non-Rayleigh sonar data, to enhance the performance of conventional constant false alarm rate (CFAR) detection. Subsequently, other than single energy criterion, multi feature fusion based on Joint-D is implemented for both the local and spatial subregions of the detection results. Finally, target recognition is performed using a classifier trained by dual-stage support vector machine (SVM), where the first stage utilizes local features and the second stage utilizes spatial features. Receiver operating characteristic (ROC) curves show that the proposed method outperforms conventional counterparts across SRR from 0-25 dB. When achieving the same detection rate, particularly the 90% threshold, it requires an average of 5 dB less SRR than conventional counterparts. In the case study using sea trial data, the detection rate reaches 100%, and the false alarm rate is consistent with the theoretical value.
3 November 2026 in Applied Acoustics
1 October 2026 in IEEE Internet of Things Journal