2 May 2019 in Journal of Sensors
Terrain-aided navigation is a promising approach to submerged position updates for autonomous underwater vehicles by matching terrain measurements against an underwater reference map. With an accurate prediction of tidal depth bias, a two-dimensional point mass filter, only estimating the horizontal position, has been proven to be effective for terrain-aided navigation. However, the tidal depth bias is unpredictable or predicts in many cases, which will result in the rapid performance degradation if a two-dimensional point mass filter is still used. To address this, a marginalized point mass filter in three dimensions is presented to concurrently estimate and compensate the tidal depth bias in this paper. In the method, the tidal depth bias is extended as a state variable and estimated using the Kalman filter, whereas the horizontal position state is still estimated by the original two-dimensional point mass filter. With the multibeam sonar, simulation experiments in a real underwater digital map demonstrate that the proposed method is able to accurately estimate the tidal depth bias and to obtain the robust navigation solution in suitable terrain.
30 December 2018 in Journal of Sensors
Terrain matching positioning is a promising method to overcome the problem that the inertial navigation error of the underwater vehicle accumulates over time. In the conventional terrain matching method, all measurement points are commonly used for matching and positioning. However, this method fails to be taken into a balanced consideration on both the computation complexity and the positioning accuracy. To reduce the computation and ensure the accuracy at the same time, an improved terrain matching method based on the gradient fitting is proposed in this paper. In the method, the gradient distributions of multiple terrain regions are firstly analyzed. Then, normal distribution is used to fit them, and according to the distribution, points with larger gradient values are selected as matching points. Finally, minimum absolute difference matching is chosen to match for positioning. Simulation results using multibeam sonar show that the improved terrain matching localization method not only reduces the computational complexity but also improves the accuracy of positioning.