Hybrid organic-inorganic perovskite solar cells (PSCs) are the novel fourth-generation solar cells, with impressive progress in the last few years. MAPbI3 is a cost-effective material used as an absorber layer in PSCs. Due to the different diffusion length of carriers, the electron transporting material (ETM) plays a vital role in PSCs' performance. ZnO ETM is a promising candidate for low-cost and high-efficiency photovoltaic technology. In this work, the normal n-i-p planar heterojunction structure has been simulated using SCAPS-1D. The influence of various parameters such as the defect density, the thickness of the MAPbI3 layer, the temperature on fill factor, the open-circuit voltage, the short circuit current density, and the power conversion efficiency are investigated and discussed in detail. We found that a 21.42% efficiency can be obtained under a thickness of around 0.5 μm, and a total defect of 1013 cm−3 at ambient temperature. These simulation results will help fabricate low-cost, high-efficiency, and low-temperature PSCs.
Third-generation thin-film solar cells based on CZTSSe are highly promising because of their excellent optoelectrical properties, earth-abundant, and non-toxicity of their constituent elements. In this work, the performance of CZTSSe-based solar cells with TiO2, CdS, and ZnSe as electron transporting materials (ETMs) was numerically investigated using the Solar Cell Capacitance Simulator (SCAPS). The effect of the active layer’s thickness and electron affinity, different buffer layers, and the contour plot of the operating temperature versus thickness of the CdS buffer layer were studied. The results show that the optimum power conversion efficiency for CdS, TiO2, and ZnSe, as the ETMs, is 23.16%, 23.13%, and 22.42%, respectively.