Hybrid organic-inorganic perovskite solar cells (PSCs) are the novel fourth-generation solar cells, with impressive progress in the last few years. MAPbI3 is a cost-effective material used as an absorber layer in PSCs. Due to the different diffusion length of carriers, the electron transporting material (ETM) plays a vital role in PSCs' performance. ZnO ETM is a promising candidate for low-cost and high-efficiency photovoltaic technology. In this work, the normal n-i-p planar heterojunction structure has been simulated using SCAPS-1D. The influence of various parameters such as the defect density, the thickness of the MAPbI3 layer, the temperature on fill factor, the open-circuit voltage, the short circuit current density, and the power conversion efficiency are investigated and discussed in detail. We found that a 21.42% efficiency can be obtained under a thickness of around 0.5 μm, and a total defect of 1013 cm−3 at ambient temperature. These simulation results will help fabricate low-cost, high-efficiency, and low-temperature PSCs.
Third-generation thin-film solar cells based on CZTSSe are highly promising because of their excellent optoelectrical properties, earth-abundant, and non-toxicity of their constituent elements. In this work, the performance of CZTSSe-based solar cells with TiO2, CdS, and ZnSe as electron transporting materials (ETMs) was numerically investigated using the Solar Cell Capacitance Simulator (SCAPS). The effect of the active layer’s thickness and electron affinity, different buffer layers, and the contour plot of the operating temperature versus thickness of the CdS buffer layer were studied. The results show that the optimum power conversion efficiency for CdS, TiO2, and ZnSe, as the ETMs, is 23.16%, 23.13%, and 22.42%, respectively.
Copper zinc tin sulfide-selenide (CZTSSe) is a promising thin-film material for photovoltaic solar cells due to its abundance, environmentally friendly constituents, direct bandgap, and high optical absorption in visible light. In this study, we used the SCAPS-1D software to investigate the heterojunction CZTSSe/CdS-based solar cell with and without a perovskite back surface field (BSF) layer added between the absorber layer and the Mo back contact. First, a simple structure CZTSSe/CdS-based solar cell without a BSF layer was considered and replicated. Then, by adding p-MAPbI3 as the BSF layer, a new kesterite solar cell structure has been proposed. Different layer parameters, such as the thickness, acceptor density, and the back contact’s work function, were used to compare the performance of both devices, with and without the BSF layer. A negative impact on cell performance was observed as a function of the series resistance. The analyses showed that the CZTSSe solar cell with the BSF achieved a higher efficiency of 32.27% compared to the cell without the BSF, which had an efficiency of 23.26%. The outcomes of this contribution may provide useful research directions for the thin-film photovoltaic field, enabling the production of highly efficient and low-cost CZTSSe-based solar cells.
27 September 2024 in Journal of Physics and Chemistry of Solids