25 June 2021 in IEEE Transactions on Power Electronics
This article proposes a condition monitoring scheme for the dc-link capacitors used in ac/dc/ac pulsewidth-modulation converters based on the signal injection, which can estimate capacitance in real time when both the rectifier and the inverter are in normal operation. First, a low-frequency signal is injected into the dc-link voltage, and its effects on the total harmonic distortion (THD) of the input current are analyzed. Accordingly, a suitable injection frequency is selected to keep the THD of input current within limits prescribed by the IEEE standard. Then, a novel calculation method of capacitor current without any dc-link current sensor is given, where the converter system is still in normal operation and different inverter operations are both taken into consideration. Finally, capacitance estimation based on the slide discrete Fourier transform is introduced. At the end of this article, experiments have been done to validate the correctness of the conclusion and effectiveness of the proposed scheme.
11 October 2019 in IEEE Access
6 November 2019 in IEEE Access
Hybrid pulse width modulation schemes are widely used in high-power traction converters with a limited switching frequency. During the transition between modulation modes, sudden changes in the voltage harmonics cause the induction motor to enter a transient process, and ultimately lead to torque impacts, current shocks and other adverse effects. To improve the existing solution for such effects, theoretical support is provided in this paper by using an equivalent circuit model and a dynamic model of an induction motor, and a specific implementation scheme for a smooth transition is given considering the third-harmonic frequency component that appears in the phase voltage during the transition. The feasibility and correctness of the scheme are proven by a simulation and an experiment.