16 January 2023 in IEEE Open Journal of Vehicular Technology
In this study, we developed a 5th generation mobile communication (5G) physical layer (PHY) experimental platform based on software-defined radio (SDR), which makes it easy to customize the transmission and reception process. The developed platform consists of an SDR-based transmitter and a receiver. Digital baseband processing is performed using internal software-based programs. Therefore, it can be used to evaluate the wireless communication performance of 5G (or user-defined modified/customized 5G) not only in a laboratory but also in any field. In addition, as an example of the use of this platform, we proposed signal processing that can receive signals at speeds of 500 km/h or higher and performed an experimental evaluation by running it on the developed platform. Through laboratory experiments in a multipath fading environment using a fading emulator, performance of the developed platform was validated. Moreover, it was confirmed that this platform can satisfy the required block error rate of 0.1 even in a multipath environment at a velocity of approximately 630 km/h, which exceeds the requirements of 5G. Therefore, it has sufficient resilience to be used in high-moving-speed environments. This platform is expected to enable simple testing and evaluation of various new PHY technologies.
11 April 2012 in IEEE Vehicular Technology Magazine
We address the problem of interference between portable cognitive emergency wireless networks (PCENs) operating in the TV white space (TVWS). We use stochastic-geometric model to gauge the expected reduction of effective service area caused by the interference between adjacent PCENs. The modeling steps are introduced in a tutorial fashion, and our results reveal the intrinsic relationship that PCEN service area has with environmental and TVWS-related system parameters, such as number of available TV channels, density of PCEN networks, and path-loss attenuation exponent. Furthermore, we give an up-to-date and timely overview of the under going activities in international standardization bodies as well as regulations created toward the realization of communications in the TVWS.
23 February 2022 in IEEE Transactions on Wireless Communications
In-band full-duplex (IBFD) systems are attracting attention as a key technology for ideally doubling channel capacity for beyond 5G and 6G. First, we propose an analytical model of the effect of $N$ -bit analog-to-digital converter (A/D) quantization noise on channel capacity quasi-upper limit of the desired signal at the base station of the IBFD systems. We derive averaged and peak powers of input signal to $N$ -bit A/D and quantization noise power of $N$ -bit A/D to formulate uplink (UL) channel capacity quasi-upper limit. Numerical analysis results by the proposed analytical model show that the UL channel capacity quasi-upper limit degrades by 16% and 80% in the 12- and 8-bit A/D, respectively. Second, we propose digital signal-processing (DSP)-assisted dual- and quad-A/Ds to reduce the quantization noise effect in IBFD systems. When A/D resolution bit is 8-bit, the proposed DSP-assisted dual- and quad-A/Ds improve the UL channel capacity quasi-upper limit by up to 92.3 and 192%, respectively, compared to conventional A/D for peak-to-average power ratio condition of 15 dB and analog self-interference (SI) cancellation capability of 30 dB. The proposed dual- and quad-A/Ds can reduce the burden on the analog SI cancellation circuitry by 6 and 12 dB, respectively.
30 October 2023 in IEEE Open Journal of Vehicular Technology
In recent years, extensive research has been conducted on the Internet of Things (IoT). Wireless Smart Ubiquitous Network (Wi-SUN) has gained considerable attention as a wireless communication standard for IoT. Wi-SUN Field Area Network (Wi-SUN FAN) is a technical specification of Wi-SUN that can be implemented in both indoor and outdoor IoT communication infrastructure with multi-hop routing. Although Wi-SUN FAN version 1.0 (Wi-SUN FAN 1.0) has been standardized by IEEE 2857-2021, there have been no studies or reviews conducted on the transmission performance of Wi-SUN FAN 1.0 regarding transmission success rate and delay time using computer simulations and experimental evaluation environments involving actual devices. In this study, the specifications of the Wi-SUN FAN are reviewed, and the fundamental transmission performance, such as average transmission success rate and average delay time, is measured using computer simulation as reference data. An experimental evaluation environment involving actual devices is developed to validate the characteristics evaluated by computer simulation. The characteristics determined by the computer simulation and experimental evaluation environment are in good agreement. Using the validated simulator, we evaluate the transmission performance in the wireless IoT environment with one border router and 100 routers randomly arranged in a flat square field with 4,000 m on a side. The average transmission success rate is approximately 1 at 1.00 × 10 –1 s –1 or less. Consequently, Wi-SUN FAN 1.0 can communicate with a higher transmission success rate even when transmitting frequent IoT-data, which is once every ten seconds.
23 December 2021 in IEEE Internet of Things Journal
Radio communication systems using the frequency-shift keying (FSK) scheme standardized by the IEEE 802.15.4g standard can realize low-power consumption and highly reliable communications and are mainly adopted for smart metering as part of the Internet of Things (IoT). However, smart metering has recently broadened its application expectations, with broadband and long-distance communications now required. To fulfill these requirements, orthogonal frequency-division multiplexing (OFDM) has been incorporated into the IEEE 802.15.4g and 802.15.4x standards. However, comprehensive transmission performance analysis of OFDM under static and multipath fading environments has not been conducted. In this article, we first evaluated the packet error rate (PER) of OFDM assuming fixed communications using computer simulations. We then evaluated the transmission distance of OFDM and showed that OFDM can communicate at transmission distances up to 3.0 times longer than those specified in IEEE 802.15.4g FSK. Next, the PER in a mobile communication environment was evaluated using computer simulations. When only the long training field (LTF) was used to estimate multipath radio channels, the required PER of 10% was not achieved, even in a mobile communication environment at a speed of several km/h. To solve this problem, we proposed a receiving scheme which included a new channel estimation scheme. This scheme successively utilized not only the LTF but also pilot signals inserted into the transmitter to estimate radio propagation characteristics. Computer simulation results showed that the required PER was achieved even in a mobile communication environment at 30–40 km/h by using the proposed scheme.