1 January 2017 in IEICE Transactions on Communications
16 January 2023 in IEEE Open Journal of Vehicular Technology
In this study, we developed a 5th generation mobile communication (5G) physical layer (PHY) experimental platform based on software-defined radio (SDR), which makes it easy to customize the transmission and reception process. The developed platform consists of an SDR-based transmitter and a receiver. Digital baseband processing is performed using internal software-based programs. Therefore, it can be used to evaluate the wireless communication performance of 5G (or user-defined modified/customized 5G) not only in a laboratory but also in any field. In addition, as an example of the use of this platform, we proposed signal processing that can receive signals at speeds of 500 km/h or higher and performed an experimental evaluation by running it on the developed platform. Through laboratory experiments in a multipath fading environment using a fading emulator, performance of the developed platform was validated. Moreover, it was confirmed that this platform can satisfy the required block error rate of 0.1 even in a multipath environment at a velocity of approximately 630 km/h, which exceeds the requirements of 5G. Therefore, it has sufficient resilience to be used in high-moving-speed environments. This platform is expected to enable simple testing and evaluation of various new PHY technologies.
1 January 2014 in IEICE Transactions on Communications
20 January 2021 in IEEE Sensors Journal
Due to the merits of simple implementation and low-power consumption, frequency shift keying (FSK) is widely used in wireless communication systems for the Internet of things (IoT) such as Wi-SUN field area network (Wi-SUN FAN). To expand IoT capacity or diversify IoT application scenarios, higher data rates are highly expected. In this paper, we propose a novel design of data rate enhancement for IEEE 802.15.4-based 2-FSK transmission scheme which meets the radio requirements defined by ARIB STD-T108 regulation in Japan. Fundamental evaluations and field experiments with developed integrated circuits (ICs) are conducted to evaluate the transmission performance of FSK with enhanced data rate parameters. Results show that with the ICs, the data rate of 600 kbps is achieved with a required input power increase of 7.0 dB compared with the conventional data rate of 100 kbps, and can achieve the packet error rate (PER) smaller than 10% for 250 m on line-of-sight (LoS) routes in urban environments. Moreover, the frequency interference level of the proposed FSK scheme is measured to evaluate the performance in practical radio conditions. Results provide reference for the channel management to operate FSK-based communication systems.
23 February 2022 in IEEE Transactions on Wireless Communications
In-band full-duplex (IBFD) systems are attracting attention as a key technology for ideally doubling channel capacity for beyond 5G and 6G. First, we propose an analytical model of the effect of $N$ -bit analog-to-digital converter (A/D) quantization noise on channel capacity quasi-upper limit of the desired signal at the base station of the IBFD systems. We derive averaged and peak powers of input signal to $N$ -bit A/D and quantization noise power of $N$ -bit A/D to formulate uplink (UL) channel capacity quasi-upper limit. Numerical analysis results by the proposed analytical model show that the UL channel capacity quasi-upper limit degrades by 16% and 80% in the 12- and 8-bit A/D, respectively. Second, we propose digital signal-processing (DSP)-assisted dual- and quad-A/Ds to reduce the quantization noise effect in IBFD systems. When A/D resolution bit is 8-bit, the proposed DSP-assisted dual- and quad-A/Ds improve the UL channel capacity quasi-upper limit by up to 92.3 and 192%, respectively, compared to conventional A/D for peak-to-average power ratio condition of 15 dB and analog self-interference (SI) cancellation capability of 30 dB. The proposed dual- and quad-A/Ds can reduce the burden on the analog SI cancellation circuitry by 6 and 12 dB, respectively.