Adam Raptakis

Adam Raptakis

Auto-generated profile, based on publicly available information

Adam Raptakis

Photonic Communications Research Laboratory, Institute of Communication and Computer Systems, National Technical University of Athens, Zografou, Greece

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 June 2021 in Journal of Lightwave Technology
Verified
Journal Article
Open access
CTChristos Tsokos
Christos Tsokos
EAEfstathios Andrianopoulos
Efstathios Andrianopoulos
ARAdam Raptakis
Adam Raptakis
NLNikolaos K. Lyras
Nikolaos K. Lyras
LGLefteris Gounaridis
Lefteris Gounaridis
CRChris G. H. Roeloffzen
Chris G. H. Roeloffzen
We demonstrate a broadband and continuously tunable 1×4 optical beamforming network (OBFN), based on the hybrid integration of indium phosphide (InP) components in the silicon nitride (Si 3 N 4 ) platform. The photonic integrated circuit (PIC) comprises a hybrid InP-Si 3 N 4 external cavity laser, a pair of InP phase modulators, a Si 3 N 4 optical single-sideband full carrier (SSBFC) filter followed by four tunable optical true time delay lines (OTTDLs), and four InP photodetectors. Each OTTDL consists of eight cascaded thermo-optical micro-ring resonators (MRRs) that impose tunable true time delay on the propagating optical signals. The OBFN-PIC is designed to facilitate the steering of a microwave signal with carrier frequency up to 40 GHz over a continuous set of beam angles. We evaluate the performance of the OBFN-PIC to handle and process microwave signals, measuring the link gain, the noise figure (NF), and the spurious-free dynamic range (SFDR) parameters. Moreover, we assess its beamforming capabilities assuming that the OBFN-PIC is part of a wireless system operating in the downlink direction and feeds a multi-element antenna array. Using microwave signals at 5 and 10 GHz with quadrature amplitude modulation (QAM) formats at 500 Mbaud, we evaluate the performance of the OBFN-PIC under various configurations. We show that error-free performance can be achieved at both operating frequencies and for all the investigated beam angles ranging from 45° to 135°, thus validating its potential for high-quality beamforming performance.

26 July 2021 in Journal of Lightwave Technology
Verified
Journal Article
Open access
ARAdam Raptakis
Adam Raptakis
LGLefteris Gounaridis
Lefteris Gounaridis
MWMadeleine Weigel
Madeleine Weigel
MKMoritz Kleinert
Moritz Kleinert
MGMichalis Georgiopoulos
Michalis Georgiopoulos
CKChristos Kouloumentas
Christos Kouloumentas
We propose a novel concept for the implementation of 2-dimensional (2D) optical phased arrays (OPAs) with end-fire waveguides as antenna elements (AEs), and we present its theoretical model and experimental proof. The concept is based on the use of 3-dimensional (3D) photonic integrated circuits (PICs) with multiple waveguiding layers on the PolyBoard platform. In their simplest form, the 3D PICs comprise AEs at different layers, vertical and lateral couplers for the distribution of light among the AEs, and phase shifters for the execution of the 2D beam scanning process. Using the field equivalence principle, we model the radiated field from the single-mode waveguide of the platform at 1550 nm, and we find that the expected beam width is 12.7°. We also investigate the perturbation that is induced into propagating fields inside parallel waveguides in proximity, and we conclude that waveguide spacings down to 6 µm can be safely used for development of uniform OPAs in the PolyBoard platform. For OPAs with 6 µm pitch and 4 AEs, we find that the maximum steering angle is 14.0° and the expected angular clearance, wherein the main radiation lobe is higher than any grating lobe by at least 3, 6 and 10 dB is 10.8°, 7.6° and 2.8°, respectively. Based on our simulations, we design and fabricate single- and 2-layer PICs with 1 × 4 and 2 × 4 OPAs. The lateral pitch of the OPAs ranges from 10 down to 6 µm, while the vertical pitch is 7.2 µm. We experimentally characterize these OPAs and validate the potential of the 2-layer PICs for 2D beam scanning on the azimuthal and elevation plane. The beam profiles and the main scanning parameters such as the maximum steering angle and the relative intensity between the main and the grating lobes are found in excellent agreement with our simulations.

10 August 2023 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
DZDimitris Zavitsanos
Dimitris Zavitsanos
ANArgiris Ntanos
Argiris Ntanos
TSTheofanis Stathopoulos
Theofanis Stathopoulos
ARAdam Raptakis
Adam Raptakis
FSFotini Setaki
Fotini Setaki
HAHercules Avramopoulos
Hercules Avramopoulos
We present a real-world Gigabit Passive Optical Network (GPON)-based Fiber to the Home (FTTH) network serving up to 32 users, installed in COSMOTE laboratories in Athens. The deployment relies on the use of fiber optics and GPON telecom equipment which are identical to those found in the currently deployed FTTH infrastructure. We describe real-life network designs that correspond to specific installations considered in Athens urban metropolitan area. We propose a practical upstream Quantum Access Network (QAN) over the installed FTTH network, relied on a centralized quantum receiver (Bob) station located at the operator's Central Office, which exploits the Time-Division Multiplexing (TDM) framing technique to receive single-photons from multiple independent quantum transmitters (Alice) located at users premises. This integration scheme is characterized by performing a series of noise measurements at single-photon level to evaluate the potential of the coexistence of classical/quantum links on the same fiber cores. The noise count rates are found to follow the Raman noise profile for specified values of effective Raman cross-sections of downstream and upstream GPON data channels. Subsequently, the experimental results are exploited to evaluate the performance of the widely-used Coherent One Way (COW) Quantum Key Distribution (QKD) protocol. The presented simulation results for the quantum layer suggest the feasibility of our integration scheme for short feeder fiber segments. Finally, the dependance of the Secure Key Rate (SKR) on the network capacity is also discussed.

10 August 2022 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
EAEfstathios Andrianopoulos
Efstathios Andrianopoulos
Nikolaos K. LyrasNikolaos K. Lyras
Nikolaos K. Lyras
CTChristos Tsokos
Christos Tsokos
TQTianwen Qian Qian
Tianwen Qian Qian
SNSimon Nellen
Simon Nellen
HAHercules Avramopoulos
Hercules Avramopoulos
We demonstrate the generation, of a mmWave signal via the injection of an optical frequency comb (OFC) into an integrated tunable dual distributed Bragg reflector (DBR) laser as well as the fiber transmission and the processing of this signal by an optical beamforming network (OBFN). The dual DBR laser is based on a hybrid indium phosphide (InP) – polymer photonic integrated circuit (PIC). Two different cases have been examined in which the microwave signal is centered around 39 GHz and 60 GHz respectively, carrying quadrature amplitude modulation (QAM) formats at 0.5 Gbaud. In this proof-of-concept scenario, the OBFN consists of two optical paths, where the relative true time delay is induced by an optical delay line (ODL). Extensive comparison between the back-to-back (B2B) case and scenarios with transmission over 25 km of standard single-mode fiber (SSMF) has been made using the error-vector magnitude (EVM) and the bit-error ratio (BER) as evaluation criteria. In all cases, error-free transmission was suggested for all QPSK signals, whereas a worst-case EVM of 11.8% was observed for 16-QAM transmission, successfully showcasing the concept’s potential. The generated microwave signal’s frequency can be set arbitrarily high, provided that high-speed photodetection equipment is available for the detection and down-conversion of the signal. Extension to higher antenna elements (AEs) numbers is straight-forward, relying only on the number of available photodetectors.

20 February 2024 in IEEE Photonics Technology Letters
Verified
Journal Article
Open access
ARAdam Raptakis
Adam Raptakis
GLGeorgios Lymperakis
Georgios Lymperakis
LGLefteris Gounaridis
Lefteris Gounaridis
MWMadeleine Weigel
Madeleine Weigel
MKMoritz Kleinert
Moritz Kleinert
CKChristos Kouloumentas
Christos Kouloumentas
We demonstrate solid-state optical beam-steering utilizing polymer waveguides as edge emitters to form optical phased arrays (OPAs) for operation at 1550 nm. Waveguide spacing below the wavelength is hindered in low index contrast OPAs by cross-coupling, leading to the formation of unwanted grating lobes in the far field. We employ non-uniform spacing between the 16 channels of the OPAs to suppress the grating lobes and improve the unambiguous beam steering range. Three different aperiodic layouts are fabricated and experimentally tested. Within a steering range of ±10° we achieve an average beamwidth of 0.45° with an ordered spacing layout, and 0.52° and 0.69° with a randomized spacing layout of $8\lambda $ and $5\lambda $ average spacing, respectively. With the latter we show suppression of the sidelobes of >11 dB and >6 dB within a steering range of ±5° and ±8°, accordingly. Power consumption of 1.28 mW/ $\pi $ per channel is achieved thanks to the excellent thermo-optic (TO) coefficient of the polymer platform. To the best of our knowledge, we are the first to demonstrate polymer-based OPAs with aperiodic spacing.

21 September 2023 in PhotoniX
Verified
Journal Article
Open access
PDF file
ARAdam Raptakis
Adam Raptakis
LGLefteris Gounaridis
Lefteris Gounaridis
JEJörn P. Epping
Jörn P. Epping
TTThi Lan Anh Tran
Thi Lan Anh Tran
TAThomas Aukes
Thomas Aukes
CKChristos Kouloumentas
Christos Kouloumentas
We demonstrate a compact heterodyne Laser Doppler Vibrometer (LDV) based on the realization of optical frequency shift in the silicon nitride photonic integration platform (TriPleX). We theoretically study, and experimentally evaluate two different photonic integrated optical frequency shifters (OFSs), utilizing serrodyne and single-sideband (SSB) modulation. Both OFSs employ stress-optic modulators (SOMs) based on the non-resonant piezoelectrical actuation of lead zirconate titanate (PZT) thin-films, deposited on top of the silicon nitride waveguides with a wafer-scale process. To improve the modulation bandwidth of the SOMs we investigate a novel configuration of the electrodes used for the actuation, where both electrodes are placed on top of the PZT layer. Using this top-top electrode configuration we report frequency shift of 100 kHz and 2.5 MHz, and suppression ratio of the unwanted sidebands of 22.1 dB and 39 dB, using the serrodyne and the SSB OFS, respectively. The best performing SOM structure induces 0.25π peak-to-peak sinusoidal phase-shift with 156 mW power dissipation at 2.5 MHz. We use the SSB-OFS in our compact LDV system to demonstrate vibration measurements in the kHz regime. The system comprises a dual-polarization coherent detector built in the PolyBoard platform, utilizing hybrid integration of InP photodiodes (PDs). High quality LDV performance with measurement of vibration frequencies up to several hundreds of kHz and displacement resolution of 10 pm are supported with our system.