2 December 2025 in Fusion Engineering and Design
16 January 2026 in IEEE Transactions on Applied Superconductivity
OpenStar Technologies is a private fusion company in New Zealand, developing a fusion reactor based on the levitated dipole. The levitated dipole has a stable magnetic configuration, which provides the basis for the design of a fusion concept. Levitated dipole-based fusion reactors will require large scale high-field high temperature superconductor (HTS) magnets operating with consistent “quasi-persistent” current while levitating. Quasi-persistent currents in levitating magnets can only be supplied by on-board power supplies that continuously replenish the energy lost from magnet operation. OpenStar has designed, built, and validated an HTS rectifier which to date has charged a 0.53 H non-insulated HTS magnet to 824 A. The initial charging of this magnet to 180 kJ over 60 hours demonstrates the first integration of a large scale HTS magnet with an embedded HTS rectifier. In October 2024, this enabled OpenStar to reach the milestone of first plasma.
12 January 2026 in IEEE Transactions on Applied Superconductivity
This paper presents an iterative method based on non-linear least squares for estimating the radial resistance of inductively coupled Non-insulated (NI) HTS coils. Although these results are of specific interest for levitated dipole fusion magnets, the estimation approach can be applied to any magnet composed of multiple NI HTS coils. OpenStar Technologies Ltd has developed a 5.6 T, 1.44 kA HTS magnet for a Levitated Dipole Reactor, named Junior, which consists of 14 individual NI coils. The proposed method was used to estimate the radial resistances in each of Junior’s 14 coils, from multiple sets of experimental data. The results showed good agreement between the estimated parameters and experimental data. The largest estimated radial resistance for one coil was 3.93 ${\mu }\mathrm{\Omega }$. The smaller outer coils had the lowest estimated radial resistance, spanning from 360–770 $\mathrm{n}\mathrm{\Omega }$. Estimates were consistent across all considered datasets for all coils, with the exception of coils 1 A and 2 B.