10 December 2004 in Japanese Journal of Applied Physics
The Morpho-butterfly wing reflects interfered brilliant blue, which originates from nanostructures on its scales, for any incidence angle of white light. We have, for the first time, fabricated a Morpho-butterfly-scale quasi-structure using focused-ion-beam chemical-vapor-deposition (FIB-CVD) and observed brilliant blue reflection from this quasi-structure with an optical microscope. We measured the reflection from real Morpho-butterfly scales and from the quasi-structure with a photonic multi-channel spectral analyzer system. The reflection spectra of the quasi-structure were very similar to those of Morpho-butterfly scales.
1 November 2003 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Focused-ion-beam chemical vapor deposition (FIB-CVD) is an excellent technology for forming three-dimensional nanostructures. Various diamond-like-carbon (DLC) free-space-wirings have been demonstrated by FIB-CVD using a computer-controlled pattern generator, which is a commercially available pattern generator for electron-beam (EB) lithography. The material composition and crystal structure of DLC free-space-wiring were studied by transmission-electron microscopy and energy-dispersive x-ray spectroscopy. As a result, it became clear that DLC free-space-wiring is amorphous carbon containing a Ga core in the wire. Furthermore, the electrical resistivity measurement of DLC free-space-wiring was carried out by two terminal electrodes. Au electrodes were fabricated by EB lithography and a lift-off process. The electrical resistivity was about 100 Ω cm at room temperature.
2 September 2013 in Lab on a Chip
Despite attempts in a number of studies to utilize muscle tissue and cells as microactuators, all of the biohybrid microdevices have been operable only in the culture medium and none have worked in air due to the dry environment. This paper demonstrates an atmospheric-operable bioactuator (AOB) fabricated by packaging an insect dorsal vessel (DV) tissue with a small amount of culture medium inside a capsule. The AOB, consisting of microtweezers and the capsule, was designed based on a structural simulation that took into account the capillary effect. The base part of the microtweezers was deformed by spontaneous contractions of the DV tissue in the medium inside the capsule, by which the front edges of the microtweezer arms projecting above the medium surface were also deformed. First, we confirmed in the medium that the DV tissue was able to reduce the gap between the arm tips of the microtweezers. After taking the AOB out of the medium, as we expected, the AOB continued to work in air at room temperature. The gap reduction in air became larger than the one in the medium due to a surface tension effect, which was consistent with the simulation findings on the surface tension by the phase-field method. Second, we demonstrated that the AOB deformed a thin-wall ring placed between its tips in air. Third, we measured the lifetime of the AOB. The AOB kept working for around 40 minutes in air, but eventually stopped due to medium evaporation. As the evaporation progressed, the microtweezers were pressed onto the capsule wall by the surface tension and opening and closing stopped. Finally, we attempted to prevent the medium from evaporating by pouring liquid paraffin (l-paraffin) over the medium after lipophilic coating of the capsule. As a result, we succeeded in prolonging the AOB lifetime to more than five days. In this study, we demonstrated the significant potential of insect muscle tissue and cells as a bioactuator in air and at room temperature. By integrating insect tissue and cells not only into a microspace but also onto a substrate, we expect to realize a biohybrid MEMS device with various functions in the near future.
1 January 2004 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
Three-dimensional (3D) nanostructures on a glass capillary have a number of useful applications such as manipulators, actuators, and sensors in the various microstructures. We observed a phenomenon that two diamondlike-carbon pillars on a tip of glass capillary fabricated by 30 keV Ga+ focused-ion-beam-chemical vapor deposition (FIB-CVD) with a precursor of phenanthrene vapor was able to work as a manipulator during FIB irradiation. It became clear that it was caused by electronic charge repulsion between two pillars, which accumulated electric charge by FIB irradiation. By applying this moving mechanism, we have developed a 3D nanomanipulator and actuator on a tip of glass capillary by FIB-CVD. Furthermore, in situ observations of movement for a 3D nanomanipulator and actuator have been demonstrated by applying voltage onto a Au-coated glass capillary.
1 November 2003 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
We studied the fabrication of free-designed three-dimensional (3D) structures by using focused-ion-beam chemical-vapor deposition. The 3D structures are fabricated by scanning 30 keV Ga+ ion-beam-assisted deposition in a 1×10−4 Pa phenanthrene atmosphere. The scanning pattern and blanking signal of the ion beam are generated by a 3D computer-aided-designed model using a computer pattern-generating system. This 3D pattern-generating system is able to fabricate overhang and hollow structures by setting suitable parameters (for example, plot pitch, dwell time, time interval of irradiations, and priorities of scanning). In this article, we demonstrate the performance of a 3D pattern-generating system by fabricating a 1:100 000 000 scale model of the Enterprise spaceship, a microring, a moth’s eyelike structure, and a morpho butterflylike structure with 200 nm spacing.