A multi-component separation method using Constant False Alarm Rate (CFAR) and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) methods and Ridge Path Regrouping (RPRG) is proposed aiming at the problem that the method based on Intrinsic Chirp Component Decomposition (ICCD) and RPRG needs to know the number of Instantaneous Frequency (IF) components. CFAR is used to detect points that may be ridges in T-F Representation (TFR), and then DBSCAN method is used to divide these points into multiple classes. The Maximum Likelihood Estimation (MLE) is used to estimate the number of IF components in the signal. The ridge paths of all IF components in all TFRs can be estimated based on this estimate using the RPRG method. The problem of frequency component separation in one-dimensional signal was transformed by this method into a path detection problem in two-dimensional TFR. Simulation and experimental data show that the ridge path estimation method based on CFAR and DBSCAN can achieve similar results with the original method when the number of components is unknown and the SNR is 5dB. The simulation MATLAB code of this paper is in: https://gitee.com/xuyuntao/md-curve-extract.git
The RCS of the current stealth target is getting smaller, and the speed is getting faster. The existing radar algorithm is difficult to detect. GRFT is a method to increase the observation time and has good performance, but it needs to search all the target motion parameters, which leads to the problem of large amount of calculation. By using the detection information of the previous frame as a prior, the search range of the GRFT method is limited, which can effectively reduce the amount of calculation. Based on Bernoulli filter, this paper proposes a hybrid integration method of intra-frame and inter-frame. The simulation results show that the detection sensitivity of the proposed algorithm is improved by 12dB when 512 pulses are accumulated, and the calculation speed of one frame echo is better than that of GRFT method.