Current methods for radar target detection usually work on the basis of high signal-to-clutter ratios. In this paper we propose a novel convolutional neura

The corner reflector is an effective means of interference for radar seekers due to its high jamming intensity, wide frequency band, and combat effectiveness ratio. Properly arranging multiple corner reflectors in an array can form dilution jamming that resembles ships, substantially enhancing the interference effect. This results in a significant decline in the precision attack efficiency of radar seekers. Hence, it is critical to accurately identify corner reflector array. The common recognition methods involve extracting features on the high-resolution range profile (HRRP) and polarization domain. However, the former is constrained by the number of corner reflectors, while the latter is affected by the accuracy of polarization measurement, both of which have limited performance on the identification of corner reflector array. In terms of the evident variations in physical structures, there must be differences in their scattering characteristics. To highlight the differences, this paper proposes a new method based on the concept of mismatched filtering, which involves changing the frequency modulation slope of the chirp signal in the filter. Then, the variance of width and intervals within a specific scope are extracted as features to characterize these differences, and an identification process is designed in combination with the support vector machine. The simulation experiments demonstrate that the proposed method exhibits stable discriminative performance and can effectively combat dilution jamming. Its accuracy rate exceeds 0.86 when the signal-to-noise ratio is greater than 0 dB. Compared to the HRRP methods, the recognition accuracy of the proposed algorithm improves 15% in relation to variations in the quantity of corner reflectors.

This article presents a high-precision airborne video synthetic aperture radar (SAR) raw echo simulation method aimed at addressing the issue of simulation accuracy in video SAR image generation. The proposed method employs separate techniques for simulating targets and ground clutter, utilizing pre-existing SAR images for clutter simulation and employing the shooting and bouncing rays (SBR) approach to generate target echoes. Additionally, the method accounts for target-generated shadows to enhance the realism of the simulation results. The fast simulation algorithm is implemented using the C++ programming language and the Accelerated Massive Parallelism (AMP) framework, providing a fusion technique for integrating clutter and target simulations. By combining the two types of simulated data to form the final SAR image, the method achieves efficient and accurate simulation technology. Experimental results demonstrate that this method not only improves computational speed but also ensures the accuracy and stability of the simulation outcomes. This research holds significant implications for the development of algorithms pertaining to video SAR target detection and tracking, providing robust support for practical applications.

When conventional motion compensation algorithms that are fit for a single target are applied to cooperative targets imaging, a well-focused image cannot be obtained due to the low correlation between adjacent returned signals. In this paper, a parametric compensation method is proposed for the imaging of cooperative targets. First, the problem of the imaging is formulated by analyzing the translational motion of the target moving along a rectilinear fight path and by assuming a signal model of cooperative targets imaging. A bulk image is then obtained by parametric compensation of the linear and quadratic phase terms, which is performed by means of estimating the translational motion parameters through the fractional Fourier transform. Next, the number of targets in the bulk image is estimated by clustering number estimation, and the segmented images from the bulk image are separated by the normalized cuts. Finally, well-focused images are obtained by refined parametric compensation of the residual quadratic and cubic phase terms, which is carried out by estimating the parameters through maximizing the image contrast. Simulation results demonstrate the effectiveness of the proposed method.

A multi-component separation method using Constant False Alarm Rate (CFAR) and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) methods and Ridge Path Regrouping (RPRG) is proposed aiming at the problem that the method based on Intrinsic Chirp Component Decomposition (ICCD) and RPRG needs to know the number of Instantaneous Frequency (IF) components. CFAR is used to detect points that may be ridges in T-F Representation (TFR), and then DBSCAN method is used to divide these points into multiple classes. The Maximum Likelihood Estimation (MLE) is used to estimate the number of IF components in the signal. The ridge paths of all IF components in all TFRs can be estimated based on this estimate using the RPRG method. The problem of frequency component separation in one-dimensional signal was transformed by this method into a path detection problem in two-dimensional TFR. Simulation and experimental data show that the ridge path estimation method based on CFAR and DBSCAN can achieve similar results with the original method when the number of components is unknown and the SNR is 5dB. The simulation MATLAB code of this paper is in: https://gitee.com/xuyuntao/md-curve-extract.git