10 April 2017 in Critical Reviews in Biotechnology
The high dependence on fossil fuels has escalated the challenges of greenhouse gas emissions and energy security. Biohydrogen is projected as a future alternative energy as a result of its non-polluting characteristics, high energy content (122 kJ/g), and economic feasibility. However, its industrial production has been hampered by several constraints such as low process yields and the formation of biohydrogen-competing reactions. This necessitates the search for other novel strategies to overcome this problem. Cell immobilization technology has been in existence for many decades and is widely used in various processes such as wastewater treatment, food technology, and pharmaceutical industry. In recent years, this technology has caught the attention of many researchers within the biohydrogen production field owing to its merits such as enhanced process yields, reduced microbial contamination, and improved homogeneity. In addition, the use of immobilization in biohydrogen production prevents washout of microbes, stabilizes the pH of the medium, and extends microbial activity during continuous processes. In this short review, an insight into the potential of cell immobilization is presented. A few immobilization techniques such as entrapment, adsorption, encapsulation, and synthetic polymers are discussed. In addition, the effects of process conditions on the performance of immobilized microbial cells during biohydrogen production are discussed. Finally, the review concludes with suggestions on improvement of cell immobilization technologies in biohydrogen production.
11 August 2020 in New Journal of Chemistry
The fabrication of low cost and highly active photocatalysts for the degradation of synthetic dyes that are effective under visible light is an ongoing challenge. Here, the synthesis of a multi-elemental CuGaInSn nanocomposite by sonication assisted galvanic replacement of liquid metal Galinstan (GaInSn) in copper sulphate solution is demonstrated as a method to produce a photocatalyst for dye degradation. It was found that the copper salt concentration and synthesis solution pH determined the composition of the final nanomaterial by minimizing surface oxidation of the catalyst and promoting the formation of a metallic nanocomposite rather than a metal oxide material. The materials were characterized with X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, transmission electron microscopy and electrochemical techniques. This analysis confirmed the presence of a solid mixed phase CuGaInSn nanocomposite which is a potential candidate for environmental remediation applications where the photocatalytic degradation of methyl orange dye was used as a model system. A degradation efficiency of 84% under low power illumination was achieved with a high degree of reusability via immobilization of the catalyst on a solid support, while a degradation efficiency of 92% was achieved under solar simulated conditions.
5 October 2023 in Advanced Functional Materials
Carbon dioxide is a greenhouse gas that contributes to global warming but fortunately can be removed via chemical conversion processes that often involve a reduction step. Dielectric barrier discharge (DBD) plasma is an effective way to promote chemical reduction processes but requires a catalyst for energetically demanding reactions. In this study, the rapid conversion of CO2 into solid carbon via a DBD plasma is reported using dispersed liquid metal Ga which is first converted into GaOOH particles to ultimately form a GaOOH/C nanocomposite. Raman and X‐ray diffraction (XRD) experiments indicate that amorphous activated carbon is formed after the plasma treatment. Further analysis demonstrates that highly dispersed sub‐nano‐sized carbon particles containing oxygen functional groups are formed uniformly on the GaOOH surface. The CO2 conversion mechanism suggests that plasma electrons activate CO2 molecules, while plasma‐generated oxygen vacancies on the catalyst surface help dissociate CO2 into solid carbon. This work opens a new approach for synthesizing materials comprising of highly dispersed sub‐nano‐sized carbon on a metal oxide support suitable for other applications such as adsorption, heterogenous catalysis, and energy conversion.
16 November 2021 in Advanced Sustainable Systems
30 May 2016 in International Journal of Coal Science & Technology
Carbon capture and storage (CCS) is amongst the possible options to reduce CO2 emission. In the application of CCS, CO2 capture techniques such as adsorption and membrane system have been proposed due to less energy requirement and environmental benign than the absorption process. However, membrane system has drawbacks such as poor membrane reproducibility, scale-up difficulty and high cost of the membrane supports. In this study synthesis and characterization of nanocomposite sodalite (HS)/ceramic membrane via “pore-plugging” hydrothermal synthesis (PPH) protocol for pre-combustion CO2 capture is reported. The morphology and crystallinity of the as-prepared membranes were checked with scanning electron microscopy and X-ray diffraction. Surface chemistry of the membrane was examined with Fourier Transform Infrared spectroscopy. In nanocomposite architecture membranes, zeolite crystals are embedded within the pores of the supports instead of forming thin-film layers of the zeolite crystals on the surface of the supports. Compared to the conventional in situ direct hydrothermal synthesis, membranes obtained from PPH possess higher mechanical strength and thermal stability. In addition, defect control with nanocomposite architecture membranes is possible because the zeolite crystals are embedded within the pores of the support, thereby limiting the maximum defect size to the pore size of the support. Furthermore, the nanocomposite architecture nature of the membranes safeguards the membrane from shocks or abrasion that could promote formation of defects. The aforementioned advantages of the nanocomposite architecture membranes could be beneficial in developing high performance and cost-effective membrane materials for pre-combustion CO2 capture.