A sensorless induction motor drive is presented, in which the principles of sliding-mode control, direct torque control (DTC), and space-vector modulation are combined to ensure high-performance operation, both in the steady state and under transient conditions. Merits of the classic DTC transient behavior are preserved, while the steady-state operation is significantly improved. The torque and flux controllers, and motor state observer are of the sliding-mode type. The inverter is directly controlled on the basis of torque and flux errors, using space-vector pulsewidth modulation. Computer simulations and experimental results presented demonstrate the robustness, accuracy, quickness, and low-chattering, wide-speed-range operation of the drive.
This article presents a new and powerful freeware software called MotorAnalysis-PM and discusses its application in electromagnetic design and analysis of permanent magnet (PM) motors for the electric vehicle (EV) industry. This new PM motor software utilizes both finite element (FE) and analytical methods to speed up the analysis and design process of PM motors significantly. The analysis and design methodology using MotorAnalysis-PM is presented and discussed for a 50 kW PM motor utilized in a commercial EV. To validate the accuracy of the software, the numerical results obtained from the PM motor design and analysis tool are compared with experimental results. The numerical and experimental results validate the flexibility of this software in achieving accurate motor design with short design times which is of great interest to EV and PM motor manufacturers.
12 August 2019 in IEEE Transactions on Power Systems
This paper proposes a new state estimation (SE) approach for power systems called spanning tree maximum exponential absolute value (ST-MEAV). The novel state estimator is developed based on the combination of the MEAV and a low stretch spanning tree preconditioner. An overall algorithm is presented to show the process. A modified ST-MEAV called ST0-MEAV is also proposed to improve the computational efficiency. Furthermore, the SE of the two FACTS devices called IPC and UIPC is addressed. The new formulations minimize the number of additional variables needed for the SE to reduce the computational load and to simplify implementation compared to previous methods presented in the literature for similar FACTS devices to UPFC or IPFC. The SE approach incorporates detailed steady-state models of the devices including IPC and UIPC constrains. The ST-MEAV algorithm is modified based on the new formulations for IPC and UIPC. Two modified IEEE test systems are used to verify the performance of ST-MEAV in the presence of IPC and UIPC. Application tests of ST-MEAV on two power grids are also presented to evaluate the state estimator performance in large-scale power grids. The simulation results of the proposed method compare favorably with those for WLS-LNR and MEAV-RCE.
23 January 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
A novel high-performance indirect real- and reactive-power control (IRRPC) scheme for induction motor (IM) drives is proposed. The IRRPC consists in adjusting the instantaneous real and reactive powers flowing in and out of the IM. No flux and torque estimation is required, which is a major advantage of the IRRPC. As a result, this control strategy is more robust than the popular field-oriented control (FOC) and direct torque control (DTC). The IRRPC significantly improves certain disadvantages of the FOC and DTC, such as the sensitivity to motor parameter variations and degraded quality of performance at very low speed. There is no need for integration of complex observers with the control strategy or of addition of extra sensors. For confirmation of effectiveness of the proposed control strategy, experimental studies in a wide speed range with accurate and erroneous assumption of motor parameters are carried out and the results are compared with those when the drive is controlled using the classic indirect FOC and DTC.
Microgrids comprise a variety of distributed energy resources, energy storage devices, and loads. The majority of sources are not suitable for direct connection to the electrical network due to the characteristics of the energy produced, such as low voltage DC power from fuel cells and PV arrays or high frequency AC power from microturbines. Therefore, voltage source converters (VSCs) are required to interface them with the network. In microgrids with the DC distribution network, the DC voltage reference setting for the VSCs operating in the voltage regulator mode, and the optimal power reference settings of the remaining VSCs working in the power dispatcher mode must be pre-determined to maintain the DC voltage within desired margins. In this paper, the problem has been formulated as an optimization problem with VSCs switching and conduction losses selected as the objective function. Computational intelligence techniques, including genetic algorithm (GA) and simulated annealing (SA) based optimization methods, have been employed to solve the optimization problem. The results of the optimal power flow have been compared with a conventional power flow.