Optimal sensor placement is an important part in the structural health monitoring of bridge structures. However, some defects are present in the existing methods, such as the focus on a single optimal index, the selection of modal order and sensor number based on experience, and the long computation time. A hybrid optimization strategy named MSE-AGA is proposed in this study to address these problems. The approach firstly selects modal order using modal participation factor. Then, the modal strain energy method is adopted to conduct the initial sensor placement. Finally, the adaptive genetic algorithm (AGA) is utilized to determine the optimal number and locations of the sensors, which uses the root mean square of off-diagonal elements in the modal assurance criterion matrix as the fitness function. A case study of sensor placement on a numerically simulated bridge structure is provided to verify the effectiveness of the MSE-AGA strategy, and the AGA method without initial placement is used as a contrast experiment. A comparison of these strategies shows that the optimal results obtained by the MSE-AGA method have a high modal strain energy index, a short computation time, and small off-diagonal elements in the modal assurance criterion matrix.
11 March 2015 in Mathematical Problems in Engineering
Optimal sensor placement (OSP) is an important part in the structural health monitoring. Due to the ability of ensuring the linear independence of the tested modal vectors, the minimum modal assurance criterion (minMAC) is considered as an effective method and is used widely. However, some defects are present in this method, such as the low modal energy and the long computation time. A new OSP method named IAGA-MMAC is presented in this study to settle the issue. First, a modified modal assurance criterion (MMAC) is proposed to improve the modal energy of the selected locations. Then, an improved adaptive genetic algorithm (IAGA), which uses the root mean square of off-diagonal elements in the MMAC matrix as the fitness function, is proposed to enhance computation efficiency. A case study of sensor placement on a numerically simulated wharf structure is provided to verify the effectiveness of the IAGA-MMAC strategy, and two different methods are used as contrast experiments. A comparison of these strategies shows that the optimal results obtained by the IAGA-MMAC method have a high modal strain energy, a quick computational speed, and small off-diagonal elements in the MMAC matrix.
11 April 2016 in Circuits, Systems, and Signal Processing
Optimal sensor placement is a key issue in the structural health monitoring of large‐scale structures. However, some aspects in existing approaches require improvement, such as the empirical and unreliable selection of mode and sensor numbers and time‐consuming computation. A novel improved particle swarm optimization (IPSO) algorithm is proposed to address these problems. The approach firstly employs the cumulative effective modal mass participation ratio to select mode number. Three strategies are then adopted to improve the PSO algorithm. Finally, the IPSO algorithm is utilized to determine the optimal sensors number and configurations. A case study of a latticed shell model is implemented to verify the feasibility of the proposed algorithm and four different PSO algorithms. The effective independence method is also taken as a contrast experiment. The comparison results show that the optimal placement schemes obtained by the PSO algorithms are valid, and the proposed IPSO algorithm has better enhancement in convergence speed and precision.
1 July 2018 in Pattern Recognition and Image Analysis
In the wavelet transform domain, the wavelet thresholding denoising is an effective noise reduction method for noisy images. The key issues of image thresholding denoising are the choice of threshold...