17 February 2023 in IEEE Transactions on Industrial Informatics
The remaining useful life (RUL) degradation under driving conditions is complex. The features from incremental capacity-differential voltage (IC-DV) curves and electrochemical impedance spectroscopy (EIS) can be implemented to identify the battery degradation modes and predict RUL. This paper proposes a light gradient boosting machine (LightGBM) based framework with electro- chemical theory to achieve RUL prediction under driving conditions. The degradation modes are identified as loss of conductivity, loss of active material and loss of lithium ion, and the EIS is refined as ohmic resistance, charge transfer resistance, solid electrolyte interphase film resistance, and Warburg resistance. The LightGBM model is improved by the adaptive robust loss function to achieve multi-loss functions adaptive adjustment for different cases and limit the effect of measurement noise on gradients. Based on the perspective of multitask learning, the Pearson correlation is analyzed to design the sharing principle, which ensures full use of features and reduce experimental costs. The proposed framework is validated by the database under four vibration cases (static, X-axis, Y-axis, and Z-axis). Experimental results demonstrate that the proposed framework is capable of providing accurate and steady RUL prediction under driving conditions even with measurement noise. The proposed framework could guide periodic maintenance and stable operation to avoid risks.
16 September 2015 in Mathematical Problems in Engineering
Due to simple calculation and good denoising effect, wavelet threshold denoising method has been widely used in signal denoising. In this method, the threshold is an important parameter that affects the denoising effect. In order to improve the denoising effect of the existing methods, a new threshold considering interscale correlation is presented. Firstly, a new correlation index is proposed based on the propagation characteristics of the wavelet coefficients. Then, a threshold determination strategy is obtained using the new index. At the end of the paper, a simulation experiment is given to verify the effectiveness of the proposed method. In the experiment, four benchmark signals are used as test signals. Simulation results show that the proposed method can achieve a good denoising effect under various signal types, noise intensities, and thresholding functions.
16 September 2015 in Mathematical Problems in Engineering
Thresholding function is an important part of the wavelet threshold denoising method, which can influence the signal denoising effect significantly. However, some defects are present in the existing methods, such as function discontinuity, fixed bias, and parameters determined by trial and error. In order to solve these problems, a new wavelet thresholding function based on hyperbolic tangent function is proposed in this paper. Firstly, the basic properties of hyperbolic tangent function are analyzed. Then, a new thresholding function with a shape parameter is presented based on hyperbolic tangent function. The continuity, monotonicity, and high-order differentiability of the new function are theoretically proven. Finally, in order to determine the final form of the new function, a shape parameter optimization strategy based on artificial fish swarm algorithm is given in this paper. Mean square error is adopted to construct the objective function, and the optimal shape parameter is achieved by iterative search. At the end of the paper, a simulation experiment is provided to verify the effectiveness of the new function. In the experiment, two benchmark signals are used as test signals. Simulation results show that the proposed function can achieve better denoising effect than the classical hard and soft thresholding functions under different signal types and noise intensities.
1 November 2013 in International Journal of Distributed Sensor Networks
Optimal sensor placement is an important part in the structural health monitoring of bridge structures. However, some defects are present in the existing methods, such as the focus on a single optimal index, the selection of modal order and sensor number based on experience, and the long computation time. A hybrid optimization strategy named MSE-AGA is proposed in this study to address these problems. The approach firstly selects modal order using modal participation factor. Then, the modal strain energy method is adopted to conduct the initial sensor placement. Finally, the adaptive genetic algorithm (AGA) is utilized to determine the optimal number and locations of the sensors, which uses the root mean square of off-diagonal elements in the modal assurance criterion matrix as the fitness function. A case study of sensor placement on a numerically simulated bridge structure is provided to verify the effectiveness of the MSE-AGA strategy, and the AGA method without initial placement is used as a contrast experiment. A comparison of these strategies shows that the optimal results obtained by the MSE-AGA method have a high modal strain energy index, a short computation time, and small off-diagonal elements in the modal assurance criterion matrix.
25 August 2016 in Transactions of the Institute of Measurement and Control
Multi-agent consensus has been widely applied in engineering. A novel protocol that can achieve an average state consensus for multi-agent systems in finite time is presented in this paper. The proposed protocol contains a non-linear and a linear term. The state consensus is achieved in finite time by the non-linear term and convergence performance is improved by the linear term to some degree. The protocol can be applied to systems with a switching topology as long as the communication graph is always undirected and connected. The upper bound of convergence time is obtained. The relationship between convergence time and protocol parameter, communication topology and initial state is analysed. Lastly, simulations are conducted to verify the effectiveness of the results.