21 August 2019 in Science Robotics
Conductive fluid receptors can be used to create soft matter computers that are suitable for the control of soft robots.
8 March 2021 in IEEE Robotics and Automation Letters
Upper limb robotic prosthetic devices currently lack adequate sensory feedback, contributing to a high rejection rate. Incorporating affective sensory feedback into these devices reduces phantom limb pain and increases control and acceptance. To address the lack of sensory feedback we present the B:Ionic glove, wearable over a robotic hand which contains sensing, computation and actuation on board. It uses shape memory alloy (SMA) actuators integrated into an armband to gently squeeze the user's arm when pressure is sensed in novel electro-fluidic fingertip sensors and decoded through soft matter logic. We found that a circular electro-fluidic sensor cavity generated the most sensitive fingertip sensor and considered a computational configuration to convey different information from robot to user. A user study was conducted to characterise the tactile interaction capabilities of the device. No significant difference was found between the skin sensitivity threshold of participants' lower and upper arm. They found it easier to distinguish stimulation locations than strengths. Finally, we demonstrate a proof-of-concept of the complete device, illustrating how it could be used to grip an object, solely from the affective tactile feedback provided by the B:Ionic glove. The B:Ionic glove is a step towards the integration of natural, soft sensory feedback into robotic prosthetic devices.
18 October 2023 in IEEE Robotics and Automation Letters
Teleoperation has widely contributed to many applications. Consequently, the design of intuitive and ergonomic control interfaces for teleoperation has become crucial. The rapid advancement of Mixed Reality (MR) has yielded tangible benefits in human-robot interaction. MR provides an immersive environment for interacting with robots, effectively reducing the mental and physical workload of operators during teleoperation. Additionally, the incorporation of haptic rendering, including kinaesthetic and tactile rendering, could further amplify the intuitiveness and efficiency of MR-based immersive teleoperation. In this study, we developed an immersive, bilateral teleoperation system, integrating Digital Twin-driven Mixed Reality (DTMR) manipulation with haptic rendering. This system comprises a commercial remote controller with a kinaesthetic rendering feature and a wearable cost-effective tactile rendering interface, called the Soft Pneumatic Tactile Array (SPTA). We carried out two user studies to assess the system's effectiveness, including a performance evaluation of key components within DTMR and a quantitative assessment of the newly developed SPTA. The results demonstrate an enhancement in both the human-robot interaction experience and teleoperation performance. For more project details, please view our website: https://sites.google.com/view/hbts-brl/home
4 September 2024 in Journal of The Royal Society Interface
Biology is a wellspring of inspiration in engineering design. This paper delves into the application of elastic instabilities—commonly used in biological systems to facilitate swift movement—as a power-amplification mechanism for soft robots. Specifically, inspired by the nonlinear mechanics of the hummingbird beak—and shedding further light on it—we design, build and test a novel, rapid-response, soft end effector. The hummingbird beak embodies the capacity for swift movement, achieving closure in less than . Previous work demonstrated that rapid movement is achieved through snap-through deformations, induced by muscular actuation of the beak’s root. Using nonlinear finite element simulations coupled with continuation algorithms, we unveil a representative portion of the equilibrium manifold of the beak-inspired structure. The exploration involves the application of a sequence of rotations as exerted by the hummingbird muscles. Specific emphasis is placed on pinpointing and tailoring the position along the manifold of the saddle-node bifurcation at which the onset of elastic instability triggers dynamic snap-through. We show the critical importance of the intermediate rotation input in the sequence, as it results in the accumulation of elastic energy that is then explosively released as kinetic energy upon snap-through. Informed by our numerical studies, we conduct experimental testing on a prototype end effector fabricated using a compliant material (thermoplastic polyurethane). The experimental results support the trends observed in the numerical simulations and demonstrate the effectiveness of the bio-inspired design. Specifically, we measure the energy transferred by the soft end effector to a pendulum, varying the input levels in the sequence of prescribed rotations. Additionally, we demonstrate a potential robotic application in scenarios demanding explosive action. From a mechanics perspective, our work sheds light on how pre-stress fields can enable swift movement in soft robotic systems with the potential to facilitate high input-to-output energy efficiency.
28 June 2023 in IEEE Robotics and Automation Letters
Unstructured environments call for versatile robots with adaptable morphology that can perform multiple goal-directed actions including locomotion in confined spaces, environmental mapping, object retrieval and object manipulation. In response to these challenges, we present the Polyflex design concept for fabrication of modular, soft truss robots and demonstrate its varied capabilities in a tetrahedral robot (Tetraflex). Tetraflex is composed of six pneumatically actuated bellows joined at four points by rigid nodes. By extending or contracting the bellows, Tetraflex is capable of large size and shape change, and rolling, crawling and bounding gaits. Furthermore, Tetraflex is able to roll onto and engulf objects then subsequently transport them with the crawling gait. The rolling gait discretises Tetraflex's locomotion into predictable steps on a triangular grid, simplifying odometry and allowing the use of path planning to attain a desired position. The size of rolling step can be changed at any time by dynamically varying the size of the robot. The crawling and bounding gaits enable Tetraflex to move in smaller incremental steps or through narrow passages (80 mm wide). The maximum speed was attained with a bounding locomotion gait at 19.6 mm/s (0.15 body lengths per second, or BL/s). Rolling locomotion attained between 15.6 and 19.4 mm/s (0.12–0.15 BL/s), and crawling 7.8 mm/s (0.06 BL/s). The rolling gait was the most accurate gait, achieving 2.3% linear deviation. The flexibility and versatility of Tetraflex in morphology, locomotion and object transportation demonstrates its suitability for deployment in a wide range of environments and for applications including surveying, search and rescue, and remote sample collection.