Chuanhao Cao

Chuanhao Cao

Auto-generated profile, based on publicly available information

Chuanhao Cao

Harbin university of science and technology, China

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 January 2020 in Journal of Macromolecular Science, Part A
Verified
Journal Article
Closed access
LLLizhu Liu
Lizhu Liu
CCChuanhao Cao
Chuanhao Cao
XMXinyu Ma
Xinyu Ma
XZXiaorui Zhang
Xiaorui Zhang
TLTong Lv
Tong Lv
A series of polyimide/AlN composite films and polyimide/AlN/BN composite films with different contents were prepared by using polyimide as organic matrix, AlN and BN as inorganic fillers. The filling of the ALN + BN particles increases the dielectric constant, the breakdown strength, and the thermal conductivity of the film. After filling in 9 vol% AlN content, the thermal conductivity of the polyimide/AlN composite film was 0.675 W/(m·K), which was three times that of the pure PI film. The PI/AlN/BN composite film had a thermal conductivity of 0.711 W/(m·K) when the content of AlN and BN was 3 vol% and 6 vol%, When the inorganic packing particles are 3%, the tensile strength loss is small and the breakdown strength is increased to 180 kV/mm. The SEM image of PI film showed that when different contents of AlN particles were added to the matrix, whitening phenomenon may occur due to poor interface bonding ability, and the problem was improved after KH560 modification. The result showed that two fillers with different particle sizes formed a close-packing, which was beneficial to increase the number of thermal conduction paths, thereby improving the thermal conductivity. Overall, this paper prepared a series of PI thin films with high thermal conductivity and high insulation.

1 January 2021 in Polímeros
Verified
Journal Article
Open access
CCChuanhao Cao
Chuanhao Cao
LLLizhu Liu
Lizhu Liu
XZXiaorui Zhang
Xiaorui Zhang

1 January 2020 in Polímeros
Verified
Journal Article
Open access
PDF file
CCChuanhao Cao
Chuanhao Cao
LLLizhu Liu
Lizhu Liu
XMXinyu Ma
Xinyu Ma
XZXiaorui Zhang
Xiaorui Zhang
TLTong Lv
Tong Lv
Two series of fluorinated copolymerized polyimide films with different dianhydride ratios were prepared via the conventional two-step method by using 4,4-oxydianiline(ODA) as the diamine monomer, 4,4'-(hexafluoroisopropylidene) diphthalic anhydride(6FDA), 4,4'-oxydiphthalic anhydride(ODPA) and 3,3',4,4'- biphenyl tetracarboxylic dianhydride(BPDA) as the dianhydride monomer in N, N-dimethylacetamide. With the increase of 6FDA in the proportion of dianhydride, the tensile strength of the polyimide film showed a decreasing trend. This work provided a high performance film. The mass retention rate at 800°C was above 50%. The glass transition temperatures of the two films were 260 °C and 275 °C. The storage modulus of the two were 1500 MPa and 1250 MPa. The loss modulus were 218.70 MPa and 120.74 MPa. The transmittance of the film was 71.43%. The transmittance of fluorinated copolymerized polyimide films were significantly improved in the visible region of ultraviolet light, indicating that the polyimide film with high transmittance, high tensile strength, high heat resistance and high storage modulus was successfully prepared. It had an excellent application prospect in the field of flexible display.