The interaction of an acid-functionalized oligo(p-phenylenevinylene) (OPV3-COOH) with nanocrystalline TiO2 has been studied as a model for semiconducting polymer–inorganic material hybrid solar cells. Langmuir adsorption studies show that the monolayer coverage of OPV3-COOH on nc-TiO2 results in 35% filling of the nanopores. Photoluminescence quenching and near steady-state photoinduced absorption spectroscopy demonstrate that an efficient forward photoinduced electron transfer occurs from OPV3-COOH to TiO2. Photovoltaic cells based on OPV3-COOH/nc-TiO2 and a liquid electrolyte as a medium for hole transport provide an incident photon-to-electron conversion efficiency of 55%, comparable to the values obtained with the best ruthenium dyes, and show that the majority of the photogenerated charges can be collected.
In hybrid polymer photovoltaics, conjugated polymers are combined with wide bandgap metal oxide semiconductors like TiO2 or ZnO. Reported maximum power conversion efficiencies (PCE) at AM1.5G conditions for a hybrid polymer bulkheterojunction device are up to 1.6 %. In this paper we report on the current-voltage characteristics of bi-layer devices consisting of TiO2 and a conjugated polymer. Several polymers with different optical bandgap were studied. The maximum External Quantum Efficiency (EQE) of the devices is comparable, but the PCE differs considerably (0.2-0.5%). The differences can for a large part be explained by the differences in optical bandgap of the polymers. It is shown that a low band gap is beneficial for the short circuit current, but does not automatically result in a high PCE as relative shifts of the highest occupied molecular orbital (HOMO) energy levels of the polymers reduce the open circuit voltage (Voc). The calculations show that a PCE up to ~ 19 % can be achieved using the maximum possible Voc and a fill factor of 80%. Judicious engineering of material combinations is required to achieve such a power output, and it expresses the need for a continuing search on potentially low cost, efficient metal oxide/polymer BHJ structures.