In the food packaging sector many efforts have been (and are) devoted to the development of new materials in order to reply to an urgent market demand for green and eco-sustainable products. Particularly a lot of attention is currently devoted both to the use of compostable and biobased polymers as innovative and promising alternative to the currently used petrochemical derived polymers, and to the re-use of waste materials coming from agriculture and food industry. In this work, multifunctional eco-sustainable systems, based on poly(lactic acid) (PLA) as biopolymeric matrix, diatomaceous earth as reinforcing filler and spent coffee grounds extract as oxygen scavenger, were produced for the first time, in order to provide a simultaneous improvement of mechanical and gas barrier properties. The influence of the diatomite and the spent coffee grounds extract on the microstructural, mechanical and oxygen barrier properties of the produced films was deeply investigated by means of X-Ray diffraction (XRD), infrared spectroscopy (FT-IR, ATR), scanning electron microscopy (SEM), uniaxial tensile tests, O2 permeabilimetry measurements. An improvement of both mechanical and oxygen barrier properties was recorded for systems characterised by the co-presence of diatomite and coffee grounds extract, suggesting a possible synergic effect of the two additives.
The dilatancy (Shear-thickening) is a time-independent rheological behaviour exhibited by some non-Newtonian fluids. These fluids manifest a surge in the apparent viscosity with an increase in the shear rate. If these fluids are encapsulated, they can be used to manufacture high-end stab resistance inserts (Cecchini et al., 2018) [1]. In the first part of this work, a comparison between the rheological performance of different shear-thickening fluids (STFs) based on nanosilica dispersed in glycols is presented. This analysis attempts to investigate the combinations of fillers and carriers with the highest energy-absorbing capabilities, among the various glycol-based colloidal STFs. In the second part, the influence of the composition of the STF on its rheological properties is analyzed statistically. The statistical analysis is performed by evaluating the interaction between the main design variables of the fluids (filler dimension, weight-to-weight ratio and molecular weight of the carrier). Finally, the puncture resistance of a composite system obtained by encapsulating the previously manufactured shear-thickening fluids in a polymeric shell is analyzed by means of a high-speed puncture test. This test is performed on the mockup of a tyre tread containing the best performing STF. The results showed that the use of the STF core increased the resistance to puncture by 20% as compared to the same volume of tyre tread material. Furthermore, the STF hermetically sealed the pierced sample, even when the tyre mockup was inflated at high internal pressures.
1 January 2018 in International Journal of Masonry Research and Innovation