21 May 2020 in Journal of Lightwave Technology
The design of application-specific integrated circuit (ASIC) is at the core of modern ultra-high-speed transponders employing advanced digital signal processing (DSP) algorithms. This manuscript discusses the motivations for jointly utilizing transmission techniques such as probabilistic shaping and digital sub-carrier multiplexing in digital coherent optical transmissions systems. We firstly report the key-building blocks of high-speed modern DSP-based transponders working up to 800G per wave. Secondly, we show the benefits of these transmission methods in terms of system level performance. Finally, we report the first, to the best of our knowledge, long-haul experimental transmission - e.g., over 1000 km - with a real-time 7 nm DSP ASIC and digital coherent optics (DCO) capable of data rates up to 1.6 Tb/s using two waves (2x800G).
3 October 2022 in Journal of Lightwave Technology
The various topologies, traffic patterns and cost targets of optical networks have prevented the deployment of end-to-end solutions across multi-domains, and the optimization of the network as a whole. The consequent limitations in flexibility, scalability, and adaptability of optical networks will become increasingly important with new applications, such as 5G/6G. Coherent transceivers based on digital subcarrier multiplexing (DSCM) are proposed to address these current constraints. In particular, DSCM allows (i) the design of high-capacity point-to-point (P2P) and -multipoint (P2MP) optical networks; (ii) simplified aggregation with passive optics; and (iii) connections between low- and high-speed transceivers. Furthermore, DSCM-based networks reduce the number of opto-electro-opto stages, halve the number of bookended transceivers, and provide a better match for existing hub-and-spoke (H&S) traffic patterns in fast-growing and dynamic access/metro segments. A DSCM-based transceiver will pave the way for the deployment of next-generation flexible, adaptable, and scalable software-configurable optical networks. Key steps and elements to realize this solution are laid out, and promising applications outlined. The first real-time experimental results of coherent P2MP transceivers are presented.
14 June 2017 in DEStech Transactions on Engineering and Technology Research
The electronic current transformer (ECT) (especially optical current transformers) contains electronic and optical devices, so it is sensitive to vibration, and the abnormal output of the ECT affected by vibration interference may cause measurement deviations. Base on the National Standard for Electronic Transformer, this paper designs the test system and method of the ECT under the vibration disturbance during the operation of the circuit breaker. The randomly selected optical current transformers were tested, it showed that, under the mechanical coupling vibration of the circuit breaker, the maximum percent of root-mean-square value of each cycle of the secondary output signal is 0.48% of the rated output and the peak value is 0.72%, which can meet the requirement of measurement accuracy. The design of the test system and method is beneficial to improve the inspection level and promote the application of ECTs.
1 January 2021 in Journal of Physics: Conference Series
Under the background that the country vigorously advocates the development of smart grids, the first step is to develop smart meters. In order to achieve smart grid harmonic pollution control to compensate for non-function rate and reduce energy consumption, while monitoring power quality in real time, this paper proposes a ZigBee-based Communication protocol, using ADE7878 energy measurement embedded into STM32 unit to use the CC2430 of the meter node and Ethernet to transmit data and perform power quality analysis. The analysis results are combined with harmonic suppression algorithms to control the power quality controller to achieve power harmonics Governance. Supported by “the Fundamental Research Funds for the Central Research Funds for the Central”: 201910497134