15 February 2018 in International Journal of Polymer Science
This study examined the influence mechanism of temperature on the interfacial shear strength (IFSS) between carbon fiber (CF) and epoxy resin (EP) matrices under various thermal loads using experimental and numerical simulation methods. To evaluate the change in IFSS as a function of the increase in temperature, a microbond test was performed under controlled temperature environment from 23°C to 150°C. The experimental results showed that IFSS values of CF/EP reduce significantly when the temperature reaches near glass transition temperature. To interpret the effect of thermal loads on IFSS, a thermal-mechanical coupling finite element model was used to simulate the process of fiber pull-out from EP. The results revealed that temperature dependence of IFSS is linked to modulus of the matrix as well as to the coefficients of thermal expansion of the fiber and matrix.
18 June 2025 in IEEE Transactions on Instrumentation and Measurement
This study is a continuation of the findings of previous studies [1, 2]. In the measurement data of wheel tread profile, abnormal data represent an important factor influencing the measurement result. To reduce the impact of abnormal data and improve the measurement accuracy, this study focuses on the detection and correction of abnormal data in the measurement of the wheel tread profile. The detection, identification, correction, and confirmation of the abnormal data in the measurement data were systematically investigated. Regarding the detection of abnormal data, a non-statistical algorithm with profile fitting was proposed to identify outliers in the measurement data. To correct abnormal data, correction strategies based on Kalman’s prediction have been proposed to identify and compensate for outliers. Synthetic simulations and experiments are performed to validate the proposed detection and correction methods. The results indicated that the abnormal data can be not only detected but also corrected well, and the data reconstruction deviation achieved a satisfactory level. Accurate detection and correction of abnormal data in the measurement of the wheel tread profile were achieved, which is significant for the morphology measurement of wheels and safety evaluation of track vehicles.
19 August 2025 in Measurement Science and Technology
On-machine measurements with high efficiency and accuracy are widely used in industrial fields. The measurement of the profile form is an indispensable part of on-machine measurement. To improve the on-machine measurements of wheel tread profiles in rail vehicles, active interpolation and correction were investigated in this study. Based on non-uniform rational B-spline, an active interpolation model was proposed, following the error analysis of profile measurements. Active interpolation optimized the measured profile form by refining the profile to approximate the theoretical profile form. Subsequently, correction was employed to confirm the accuracy and reliability of the interpolation. Furthermore, combining active interpolation with error tracking can suppress the errors generated by interpolation calculations and the outliers in measurement data. A simulation was conducted to determine the feasibility and effectiveness of the proposed method, and the simulation results indicated that the profile errors were suppressed. Then, active interpolation and correction were applied to the on-machine measurement of a wheel tread profile, the measurement accuracy of the wheel tread profile reached a satisfactory level. As independent measurement data processing, active interpolation and correction improved the on-machine measurement of wheel tread profiles and can be applied to a set of industrial measurements.