Abstract: For large complex structures, such as power stations, refineries and other processing plants, cost‐effective operation is essential. With power stations, failures of components without prior warning can have serious consequences for personnel on‐site and be extremely expensive in terms of both losses in generation revenue and repair costs. The ability to monitor and assess the evolution of damage is critical to maximise plant availability and to minimise the risk of failures that pose a threat to personnel safety. This paper relates to the methods used to estimate creep damage in service‐aged low‐alloy steel steam piping. Welds and the extrados of bends in steam pipes are a particular problem with regard to measuring for the onset and progression of creep failure. Existing techniques will be discussed with respect to traditional site‐based, sample extraction and assessment. Emerging strain‐monitoring techniques will also be described and evaluated that include point‐to‐point measurement and two‐dimensional mapping of creep strain across the weld zone and other creep‐susceptible components of power station steam piping.
1 February 2018 in International Materials Reviews
The safe operation of ageing materials and structures operating at high temperature and pressure is challenging. This paper, for the first time, clearly addresses the role of small specimen creep testing methods within a practical life assessment framework, with a case study used to illustrate the main principles and applications. To enhance the current practice for assessing the condition of creep ageing components, more proactive use of small specimen testing methods is proposed for the in-service condition assessment of power plant materials, earlier in the plant lifecycle and within a holistic life assessment framework. The paper describes how small specimen creep testing methods and other complementary tools can be used together in a new structured approach to life management. There is a clear need to provide the plant owner with more reliable and effective life prediction tools, based on earlier and more rigorous assessment of in-service life consumption. A novel, holistic, life assessment methodology including the use of small specimen creep testing has been developed by the authors.
19 April 2013 in International Journal of Pressure Vessels and Piping
The effect of shot peening on subsequent low cycle fatigue behaviour of a representative low pressure steam turbine blade material has been investigated in bend test samples. An analysis of the short fatigue crack growth behaviour has been conducted. For samples with no stress concentration feature, shot peening was found to have a more evident beneficial effect at lower strain levels than at higher strain levels, whereas for samples with a stress concentration feature, the beneficial effect was retained even at higher strain levels. Preexisting cracks were observed on the shot peened surface, which started to grow at 10–25 of fatigue life in the low cycle fatigue regime. The crack propagation rate was slower than that observed in the ground sample, suggesting that the shot peening process delayed crack propagation. This improvement in fatigue life has been attributed to the significant slowing of small cracks while growing through surface regions of significant compressive residual stresses and local workhardening developed by the shot peening process. Once cracks in the notch root have penetrated this region in the depth direction, faster crack growth rates, similar to those observed in the ground case, were seen.