Chris Maharaj

Prof. Chris Maharaj

orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2015 in Education and Information Technologies
Verified
Journal Article
Closed access
PDF file
EBErik Blair
Erik Blair
CMChris Maharaj
Chris Maharaj
SPSimone Primus
Simone Primus

1 January 2017 in Cogent Engineering
Verified
Journal Article
Open access
CMChris Maharaj
Chris Maharaj
DWDaniel White
Daniel White
RMRean Maharaj
Rean Maharaj
CMCheryon Morin
Cheryon Morin
Electric arc Furnace steel slag produced from the ferrous smelting process in the manufacture of steel in Trinidad and Tobago presents disposal and environmental challenges. Research has demonstrated the possibility of overcoming these challenges by using this waste material as a substitute for sand and limestone aggregates for road surface course construction. The chemistry of the interaction of mineral aggregates with asphaltic materials determines the mechanical properties of the mixture and its suitability for engineering applications. Since the chemistry of asphaltic materials from different sources vary the properties of the mixtures cannot be generalized. The available literature on the utilization of slag as an aggregate with Trinidad and Tobago asphaltic materials for road construction is limited. This study investigated the influence of electric arc furnace steel slag (0–20% by weight of ¾ inch sized aggregates) using the Marshall stability of blends to determine the optimal slag content. Results revealed that, a slag content of 15% by mass of ¾ inch sized aggregates (or 2.25% of the total mass of aggregate) was optimal within Marshall stability and air void acceptability. Reuse of steel slag aggregate in this manner will result improvements in pavement performance and an environmentally friendly and more efficient management of this waste materials and preservation of environment.

13 July 2009 in Strain
Verified
Journal Article
Open access
PDF file
CMChris Maharaj
Chris Maharaj
JDJ. P. Dear
J. P. Dear
AMA. Morris
A. Morris
Abstract:  For large complex structures, such as power stations, refineries and other processing plants, cost‐effective operation is essential. With power stations, failures of components without prior warning can have serious consequences for personnel on‐site and be extremely expensive in terms of both losses in generation revenue and repair costs. The ability to monitor and assess the evolution of damage is critical to maximise plant availability and to minimise the risk of failures that pose a threat to personnel safety. This paper relates to the methods used to estimate creep damage in service‐aged low‐alloy steel steam piping. Welds and the extrados of bends in steam pipes are a particular problem with regard to measuring for the onset and progression of creep failure. Existing techniques will be discussed with respect to traditional site‐based, sample extraction and assessment. Emerging strain‐monitoring techniques will also be described and evaluated that include point‐to‐point measurement and two‐dimensional mapping of creep strain across the weld zone and other creep‐susceptible components of power station steam piping.

1 December 2018 in Additive Manufacturing
Verified
Journal Article
Open access
YIY. Ibrahim
Y. Ibrahim
ZLZ. Li
Z. Li
CDC.M. Davies
C.M. Davies
CMChris Maharaj
Chris Maharaj
JDJ.P. Dear
J.P. Dear
PHP.A. Hooper
P.A. Hooper

1 February 2015 in Progress in Rubber, Plastics and Recycling Technology
Verified
Journal Article
Open access
CMChris Maharaj
Chris Maharaj
RMRean Maharaj
Rean Maharaj
JMJulian Maynard
Julian Maynard
Research is extremely limited on the combination of polymeric materials, such as discarded polyethylene terephthalate (PET), with asphaltic materials indigenous to Trinidad and Tobago. This paper examines the effect of both concentration and particle size of added PET on the rheological properties of Trinidad Lake Asphalt (TLA) and Trinidad Petroleum Bitumen (TPB). The PET particle size ranges under study were >0.30 mm to 0.60 mm, >0.60 mm to 0.85 mm, and >0.85 mm to 1.18 mm. These particle sizes were added in concentrations by weight ranging from 2% to 8% PET for TPB and 2% to 4% PET for TLA. Incorporating the waste polymeric material PET in TLA and TPB influenced the physical properties of the resulting blends. For TLA-PET blends, the largest particle size range produced values of complex shear moduli that were higher than pure TLA. The smallest particle size range had the opposite effect. The optimal concentration for fatigue cracking and rutting resistance occurred at 2% PET with the largest particle size range. For TPB-PET blends, the peak value of complex shear modulus generally occurred at concentrations above pure TPB for all particle size ranges and temperatures tested. As the particle size range increased, these peak values occurred at lower concentrations of PET. The 2% concentration for the largest particle size range provided the best fatigue cracking resistance, whereas the particle size range >0.60 mm to 0.85 mm produced the best rutting resistance. This study demonstrated that incorporating waste PET as an additive in road paving mixtures could improve the overall quality of roads and also be a sustainable waste disposal option. Further research is recommended on the effect of PET particle size range and concentrations on TLA/TPB combinations commonly used in road paving applications along with accelerated weathering studies.

1 December 2008 in Engineering Failure Analysis
Verified
Journal Article
Closed access
CMChris Maharaj
Chris Maharaj
CIClément A.C. Imbert
Clément A.C. Imbert
JDJohn P Dear
John P Dear