The main goal of this work is to study dry sliding wear behavior of NiCrSiB-TiB2plasma sprayed coating against NiCrSiB coating. NiCrSiB-based powders with 10, 20, 40 wt.% TiB2particles content were deposited on steel substrates by plasma spraying. The structure of NiCrSiB-TiB2coatings consists of Ni-based matrix and TiB2and CrB grains. Among the coatings studied, the NiCrSiB-20wt.%TiB2shows excellent wear-resistance. The worn surfaces were observed using scanning electron microscopy and Auger electron spectroscopy to determine the wear mechanisms.
In this study, the wettability and interaction of TiB2 with melted iron and iron-molybdenum alloys have been investigated. The wetting contact angles were determined, the structure and phase composition of the drops have been investigated by the methods of energy dispersive X-ray microanalysis. The results showed that TiB2–(Fe-13%Mo) system prove to be an optimum one for the new cermets production because of good wetting and minimal interaction between components. The TiB2-(Fe-13wt.%Mo) cermets were produced by sintering in vacuum. The influence of initial TiB2 particles size on the structure formation of the cermets above has been established.
1 May 2020 in Powder Metallurgy and Metal Ceramics