1 May 1995 in Journal of Physical and Chemical Reference Data
New experimental data on the thermal conductivity of liquid water along the saturation line have been obtained recently, using the bare and coated transient hot wire technique, with high accuracy. The quality of the data is such that new standard reference values can be proposed with confidence limits of 0.7% at a 95% confidence level. These data and the correlation herein presented revise a previous correlation endorsed by IUPAC.
21 April 2009 in Journal of Physical and Chemical Reference Data
The International Association for the Properties of Water and Steam (IAPWS) encouraged an extensive research effort to update the IAPS Formulation 1985 for the Viscosity of Ordinary Water Substance, leading to the adoption of a Release on the IAPWS Formulation 2008 for the Viscosity of Ordinary Water Substance. This manuscript describes the development and evaluation of the 2008 formulation, which provides a correlating equation for the viscosity of water for fluid states up to and with uncertainties from less than 1% to 7% depending on the state point. This manuscript describes the development and evaluation of the IAPWS Formulation 2008 for the Viscosity of Ordinary Water Substance, which provides a correlating equation for the viscosity of water for fluid states up to and with uncertainties from less than 1% to 7% depending on the state point.
10 February 2006 in Journal of Physical and Chemical Reference Data
The available experimental data for the density and viscosity of liquid aluminum and iron have been critically examined with the intention of establishing a density and a viscosity standard. All experimental data have been categorized into primary and secondary data according to the quality of measurement specified by a series of criteria. The proposed standard reference correlations for the density of the aluminum and iron are characterized by standard deviations of 0.65% and 0.77% at the 95% confidence level, respectively. The overall uncertainty in the absolute values of the density is estimated to be one of for aluminum and 0.8% for iron, which is worse than that of the most optimistic claims but recognizes the unexplained discrepancies between different methods. The standard reference correlations for the viscosity of aluminum and iron are characterized by standard deviations of 13.7% and 5.7% at the 95% confidence level, respectively. The uncertainty in the absolute values of the viscosity of the two metals is thought to be no larger than the scatter between measurements made with different techniques and so can be said to be in the case of aluminum and in the case of iron.
1 July 2004 in International Journal of Thermophysics
27 August 2010 in Journal of Physical and Chemical Reference Data
KAKonstantinos D. Antoniadis
Konstantinos D. Antoniadis
+2
The available experimental data for the density and viscosity of liquid copper and tin have been critically examined with the intention of establishing a density and a viscosity standard. All experimental data have been categorized into primary and secondary data according to the quality of measurement specified by a series of criteria. The proposed standard reference correlations for the density of copper and tin are characterized by standard deviations of 1.3% and 1.0% at the 95% confidence level, respectively. The standard reference correlations for the viscosity of copper and tin are characterized by standard deviations of 6.3% and 20% at the 95% confidence level, respectively.
1 May 2005 in International Journal of Thermophysics