Department of Physics , Faculty of Mathematics and Natural Sciences, University of Prishtina ``Hasan Prishtina'', Rr. ``Nëna Terezë'' p.n., 10000 Prishtina, Kosovo
Auto-generated profile, based on publicly available information
Njomza Elezaj
Department of Physics , Faculty of Mathematics and Natural Sciences, University of Prishtina ``Hasan Prishtina'', Rr. ``Nëna Terezë'' p.n., 10000 Prishtina, Kosovo
This study aims to investigate radon (Rn-222) gas concentrations in soil and water within seismic-prone regions of Peja and Vitia, Kosovo. The study utilizes the Alpha GUARD PQ2000 PRO equipment for precise measurement, based on the primary and some secondary data gathered. The observed soil gas radon concentrations ranged from 34.6 kBq/m3 to 130.4 kBq/m3 in Peja and 19.8 kBq/m3 to 73.2 kBq/m3 in Vitia, amidst minor seismic events with magnitudes between 1.5 and 2.6. The epicenters are located at distances ranging from 3.1 to 38 km from the radon monitoring sites. The seasonal correction factor was 0.98 for the dry season and 1.01 for the wet season for both areas (Peja and Vitia). Concurrently, radon activity concentrations in spring water varied from 5.7 Bq/L to 9.6 Bq/L in Peja and from 212.8 Bq/L to 275.3 Bq/L in Vitia. These findings emphasize the potential of radon monitoring as an earthquake precursor and highlight the influence of meteorological factors on radon levels, paving the way for future research in earthquake forecasting and environmental safety. Notably, the soil radon levels decrease during heavy rainfall.This contributes to understanding radon’s behavior under varying environmental conditions.
This research aims to determine the depth of diffusion of nitrogen in steel 16MnCr5 after gas nitriding. Nitriding was performed in the ammonia atmosphere at three temperatures (510, 550 and 590°C), with four different durations for each temperature. The research techniques were metallographic and electron probe micro-analysis (EPMA). According to the first method, with the optical microscope Neophot 30 of the firm Carl Zeiss Jena, the surfaces of all samples were observed. The nitriding layers were photographed with the help of a microscope, from which the depths of nitrogen diffusion were determined. The hardness-depth profiles of nitride specimens were determined with a Vickers automatic micro-hardness tester from LECO, and the distance between two consecutive points was 50 μm. The depth of nitrogen diffusion into the nitride samples was determined from the hardness curves. The nitrogen concentration-depth profiles of the nitrided specimens were determined with EPMA using a Joel JXA-8900RL microanalyser operated at 20 kV. A comparison of the results of the different experimental methods was made, which allowed conclusions to be made as regards the depth of nitrogen diffusion in 16MnCr5 steel.
31 July 2021 in International Journal of Computational and Experimental Science and Engineering
This study is concerned with experimental curves of: hardness, residual stress and concentration of nitrogen at the precipitation layer at alloy steels after gas nitriding. The purpose of this treatment is that through experimental curves to identify the relationship and causality between hardness, on one side, and on the other, residual stress respectively concentration of nitrogen. Comparing the shape and slope of these curves we can conclude that, concentration of diffused nitrogen on the steel lattice, respectively ferrite, is a cause of increased hardness at the precipitation layer. More to the point, as a result of nitrogen diffusion, residual stress emerge which cause increase of hardness. The intensity and slope of the curves of hardness depends on the intensity and slope of the nitrogen concentration respectively residual stress.
17 September 2026 in Radiation Protection Dosimetry
Detection and management of alpha (α)-emitting radioactive sources in scrap metal present a significant challenge for radiological safety, particularly in countries lacking infrastructure for the final disposal of radioactive waste. This paper presents a case study from Kosovo addressing the detection, identification, dose measurement, and isolation of an alpha-emitting radioactive source discovered in scrap metal. Identification was performed using portable radiation survey instruments and gamma spectrometry, confirming the presence of thorium-232 and uranium-232. Measurements indicated a count rate of ~2000 cps and a maximum ambient dose rate of 6.51 μSv/h measured at an approximate distance of 5 cm from the radioactive source prior to isolation and concrete filling. To reduce exposure and contamination risks, the source was isolated in a 200-L metal drum filled with reinforced concrete. Dose rate mapping performed before and after isolation demonstrated a significant reduction in radiation levels, with a maximum reduction factor of 4.86, indicating a measurable reduction in ambient dose rate following temporary isolation.