24 October 2017 in IEEE Transactions on Instrumentation and Measurement
Double-threshold method is a typical and simple time-of-flight (TOF) measurement method for time-difference-based ultrasonic flowmeter. Some improvements have been proposed to suppress the cycle-skip phenomenon in double-threshold method. However, there are still some application limitations when the waveform is distorted caused by the environment change, especially the temperature change. This paper proposes a similarity judgment-based double-threshold method to deal with the cycle-skip problem. In this method, time values of three consecutive positive zero-crossing points after the feature point are acquired and five consecutive cycles after the first obtained time are saved. The TOF is automatically selected from three acquired time values according to an adaptive determination function which bases on the similarity between signals from two adjacent measurements. These operations guarantee that the obtained TOF locates on the same positive zero-crossing point in each measurement. The proposed method was validated by both numerical and experimental tests. Comparison between the proposed method and other double-threshold methods shows that the proposed method successfully eliminates cycle-skip phenomenon under different working conditions.
1 January 2021 in IOP Conference Series: Earth and Environmental Science
The mechanical properties and fracture behavior of a SiCf/SiC composite material were studied by in-situ three-point bending testing. The deformation and cracking behavior of SiCf/SiC composite material was captured by the equipped scanning electron microscope. The experimental results indicate that the fracture property was highly related to the microstructure of the matrix and the SiC fibres. The in-situ observation showed that the composite material exhibited complex crack initiation and propagation process under three-point bending. Vertical microcracks initiated at the root of the preset notch and propagated vertically till blocked by the horizontal fibers. Driven by the large loca stress, horizontal cracks were also found initiated adjacent to the notch root and propagated horizontally along the interface between the fibers and the matrix.