Boron doping brings remarkable features and modified properties to graphene. In this study, we used molecular dynamics simulations to investigate the influence of vacancies on the graphene boron doping process. The existence of vacancies increases the boron content of doped graphene sheet. The physical mechanisms behind this phenomenon are discussed. The vacancy concentration of graphene affects the formation energy of boron-vacancy pair, the collision frequency between boron atoms and graphene sheet and also affects the boron atom capture cross section of graphene. We have also investigated the boron doping process for bicrystalline graphene. The results reveal that boron atoms tend to be adsorbed on the grain boundary region. The mechanical properties of the boron doped bicrystalline graphene are enhanced compared with the undoped graphene.
1 January 2021 in IOP Conference Series: Earth and Environmental Science
The mechanical properties and fracture behavior of a SiCf/SiC composite material were studied by in-situ three-point bending testing. The deformation and cracking behavior of SiCf/SiC composite material was captured by the equipped scanning electron microscope. The experimental results indicate that the fracture property was highly related to the microstructure of the matrix and the SiC fibres. The in-situ observation showed that the composite material exhibited complex crack initiation and propagation process under three-point bending. Vertical microcracks initiated at the root of the preset notch and propagated vertically till blocked by the horizontal fibers. Driven by the large loca stress, horizontal cracks were also found initiated adjacent to the notch root and propagated horizontally along the interface between the fibers and the matrix.
31 July 2017 in Journal of Nuclear Engineering and Radiation Science
A finite element method (FEM) is applied to investigate the thermal conductivity of polycrystalline UO2. The influences of microstructure are especially important for UO2 due to the severe structural changes under irradiation conditions. In this study, we have investigated the influences of microstructures on the thermal conductivity of polycrystalline UO2 using FEM. The temperature profile of fuel pellet with different microstructures during service is also investigated. The thermal conductivity increases with increasing grain size. The grain size distribution has obvious influence on the thermal conductivity especially when there are pores in the polycrystal. The influences of porosity and pore size are very sensitive to the position of the pores. The results obtained in this study are useful for the prediction of property changes of UO2 fuel in pile and important to gain some design guidance to tune the properties through the control of the microstructure.