6 November 2017 in Applied Physics Letters
We study the excitation of spin waves in scaled magnetic waveguides using the magnetoelastic effect. In uniformly magnetized systems, normal strains parallel or perpendicular to the magnetization direction do not lead to spin wave excitation since the magnetoelastic torque is zero. Using micromagnetic simulations, we show that the nonuniformity of the magnetization in submicron waveguides due to the effect of the demagnetizing field leads to the excitation of spin waves for oscillating normal strains both parallel and perpendicular to the magnetization. The excitation by biaxial normal in-plane strain was found to be much more efficient than that by uniaxial normal out-of-plane strain. For narrow waveguides with a width of 200 nm, the excitation efficiency of biaxial normal in-plane strain was comparable to that of shear strain.
31 May 2023 in npj 2D Materials and Applications
Metal contacts form one of the main limitations for the introduction of 2D materials in next-generation scaled devices. Through ab-initio simulation techniques, we shed light on the fundamental physics and screen several 2D and 3D top and side contact metals. Our findings highlight that a low semiconducting-metal contact resistance can be achieved. By selecting an appropriate 2D metal, we demonstrate both ohmic or small Schottky barrier top and side contacts. This leads to a contact resistance below 100 Ωμm and good device drive performance with currents in ON state up to 1400 μA/μm, i.e., reduced by a mere 25% compared to a reference with perfect ohmic contacts, provided a sufficiently high doping concentration of 1.8×1013 cm−2 is used. Additionally, we show that this doping concentration can be achieved through electrostatic doping with a gate. Finally, we perform a screening of possible 2D–3D top contacts. Finding an ohmic 2D–3D contact without a Schottky barrier has proven difficult, but it is shown that for the case of intermediate interaction strength and a limited Schottky barrier, contact resistances below 100 Ωμm can be achieved.
8 June 2023 in Journal of Computational Electronics
Quantum transport simulations based on the non-equilibrium Green’s function formalism require accurate integration of the charges in the system. We demonstrate our implementation of a full charge integration scheme, which automatically incorporates electronic screening effects and is predicted to incorporate interface charges more correctly than the simpler excess charge approach. We first show that under certain conditions the two approaches are equivalent, e.g., for single doping type purely semiconducting devices. We then demonstrate that for devices containing metals, the two approaches may sometimes demonstrate significantly different behavior.
15 November 2024 in Computer Physics Communications
9 March 2023 in Research Square
Quantum transport simulations based on the Non-Equilibrium Green’s Function formalism require accurate integration of the charges in the system. We demonstrate our implementation of a full-band integration scheme, which automatically incorporates electronic screening effects and is predicted to incorporate interface charges more correctly than the simpler excess charge approach. We show that for single doping type purely semiconducting devices, the two approaches are equivalent. We also highlight the influence of using the full-band approach for devices containing metals.