24 March 2022 in Journal of Materials Science & Technology
1 June 2021 in Ceramics International
1 October 2019 in IOP Conference Series: Materials Science and Engineering
In this study, walnut processing by-product was served as filler to make three-layer plywood, and the physical-mechanical properties were also discussed. The results showed that the formaldehyde emission of plywood corresponding to walnut shell and walnut dregs decreased by 0.0542 mg/L and 0.066 mg/L, respectively. The properties of plywood filled with walnut dregs are better than that of walnut shell filler, and the formaldehyde emission of the corresponding plate is lower. At the same time, compared with flour, the wet bond strength of walnut shell plywood increased by 0.0332 MPa, and that of walnut dregs plywood decreased by 0.123 MPa, but they all met the national standards.
1 July 2011 in Applied Mechanics and Materials
Concrete demolition waste has been proved to be an excellent source of aggregates for new concrete production. Four types of recycled concrete specimens were made for cyclic loading tests in laboratory, in order to research the acoustics parameters and deformation feature of recycled concrete under cyclic loading. Acoustics parameters such as ultrasonic wave time, ultrasonic velocity and ultrasonic amplitude of recycled concrete were tested synchronously while recycled concrete were loaded. Test results show the evolution of fatigue total strain of recycled concrete undergoes three stages. The cycle times in the three stages accounted for 10%, 80% and 10% of the fatigue life respectively. These stages can be simulated by power function equations, first-order linear equations and exponential functions accordingly. Tests results show that wave time increased with the rise of cyclic times, while wave amplitude decreased in the same time.
9 November 2026 in Journal of Materials Research and Technology