In this study, walnut processing by-product was served as filler to make three-layer plywood, and the physical-mechanical properties were also discussed. The results showed that the formaldehyde emission of plywood corresponding to walnut shell and walnut dregs decreased by 0.0542 mg/L and 0.066 mg/L, respectively. The properties of plywood filled with walnut dregs are better than that of walnut shell filler, and the formaldehyde emission of the corresponding plate is lower. At the same time, compared with flour, the wet bond strength of walnut shell plywood increased by 0.0332 MPa, and that of walnut dregs plywood decreased by 0.123 MPa, but they all met the national standards.