1 July 2014 in Journal of Vinyl and Additive Technology
19 January 2016 in Key Engineering Materials
The effects of mixing approach on compressive, flexural, water absorption properties and morphology of the epoxy nanocomposites incorporating 0 and 3 wt% fly ash-based geopolymer were investigated. The mechanical stirrer with two different type of propeller; four blade (type A) and dissolver (type B) was used to blend the epoxy with the nanoclay and the fly ash-based geopolymer filler. It was found that the epoxy nanocomposite prepared using dissolver propeller (type B) performed higher compressive strength and higher flexural strength as compared to the one prepared using four blade propeller (type A). We postulate that this was due to an improved mixing efficiency and dispersion quality as observed through Field Emission Scanning Electron Microscopy (FESEM).
30 September 2017 in Materiale Plastice
CGChe Mohd Ruzaidi Ghazali
Yusrina Mat Daud, Kamarudin Hussin, Azlin Fazlina Osman, Che Mohd Ruzaidi Ghazali, Mohd Mustafa Al Bakri Abdullah, Andrei Victor Sandu - Dynamic Mechanical Properties of Hybrid Layered Silicates/Kaolin Geopolymer Filler in Epoxy Composites
10 June 2015 in Materials Science Forum
The effect of fly ash-based geopolymer in epoxy-layered silicates nanocomposites was studied through flexural properties and morphological characterization. In this study, a series of nanocomposites with fly ash-based geopolymer containing 1-7% wt were prepared. It was found that the addition of fly ash with lower content in the beginning showed lower flexural strength than nanocomposites without fly ash. However, flexural properties suddenly increased at 3% wt of fly ash geopolymer content in comparison to origin. This indicates the blending of fly ash geopolymer in nanocomposites systems have the ability for further studied.
1 July 2019 in IOP Conference Series: Materials Science and Engineering
The preparation and characterization of glass reinforced epoxy filled with different weight percentage of geopolymers filler attained from fly ashand epoxy resins are reported limited of study. Recent glass reinforced epoxy pipe are reported exhibits relatively low mechanical properties, which limit their usage in structural applications and in oil and gas industrial. Thus, this restriction could be overcome through the formation of the addition of geopolymer fillers to improve their strength and toughness. The glass fiber was impregnated with different weight percentage and different molarity of fly ash-based geopolymer and epoxy hardener resin. Composite samples were made manually by filament winding technique and cured under room temperature. The sections perpendicular to the fibers and surfaces of the composites were analyzed by means of scanning electron microscope to estimate the adhesion between geopolymer matrices and fiber reinforcement. Relatively, wide range of geopolymer weight percentage from 10 % to 30 % at which can obtain high compressive properties, maximal values of compressive strength is 94.64 MPa and compressive modulus 2373.58 MPa for the sample with 30 % weight percentage of filler loading. These new composites materials show expressively enhanced mechanical properties if matched to straight glass reinforced epoxy pipe without any geopolymer filler. The positive mixture of synthetic method with the use of industrial by-products has acceptable fabricating novel low cost aluminosilicate binders, thanks to their suitable bondin contradiction of materials frequently used in structural application, could be used within the field of oil and gas industry.
1 December 2013 in Key Engineering Materials
A review is given of polyolefins layered silicates nanocomposites. This group of commodity thermoplastic is widely used and gain a great attention among researcher now days for nanocomposite preparation with layered silicates as inorganic filler. Herein, the structure and properties of layered silicates, compatibilzations of polyolefins, the syhthesise preparative method are discussed in general.