1 January 2022 in High Power Laser Science and Engineering
High-power continuous-wave single-frequency Er-doped fiber amplifiers at 1560 nm by in-band and core pumping of a 1480 nm Raman fiber laser are investigated in detail. Both co- and counter-pumping configurations are studied experimentally. Up to 59.1 W output and 90% efficiency were obtained in the fundamental mode and linear polarization in the co-pumped case, while less power and efficiency were achieved in the counter-pumped setup for additional loss. The amplifier performs indistinguishably in terms of laser linewidth and relative intensity noise in the frequency range up to 10 MHz for both configurations. However, the spectral pedestal is raised in co-pumping, caused by cross-phase modulation between the pump and signal laser, which is observed and analyzed for the first time. Nevertheless, the spectral pedestal is 34.9 dB below the peak, which has a negligible effect for most applications.
22 March 2023 in High Power Laser Science and Engineering
The phase summation effect in sum-frequency mixing process is utilized to avoid a nonlinearity obstacle in the power scaling of single-frequency visible or ultraviolet lasers. Two single-frequency fundamental lasers are spectrally broadened by phase modulation to suppress stimulated Brillouin scattering in fiber amplifier and achieve higher power. After sum-frequency mixing in a nonlinear optical crystal, the upconverted laser returns to single frequency due to phase summation, when the phase modulations on two fundamental lasers have a similar amplitude but opposite sign. The method was experimentally proved in a Raman fiber amplifier-based laser system, which generated a power-scalable sideband-free single-frequency 590 nm laser. The proposal manifests the importance of phase operation in wave-mixing processes for precision laser technology.
11 April 2023 in High Power Laser Science and Engineering
The publisher apologises that due to a publishing error this article was published into volume 10 (2022) rather than volume 11. Unfortunately, we are unable to correct this error and so this article has now been updated to confirm the publishing volume as volume 10 (2022). Any accepted and publication dates associated with the article are still correct.
3 March 2026 in Optics Express
A high-power, narrow-linewidth, continuous-wave 355 nm laser based on single-pass third-harmonic generation of a fiber laser in two LBO crystals is presented. Both type I and type II critical phase-matching in LBO crystals was investigated for the sum-frequency generation stage. A maximum output power of 5 W with a root-mean-square power stability of 0.73% was achieved by using a type-I critical PM LBO crystal, with a single-pass conversion efficiency of 1.7% from 1064 nm to 355 nm. The relative intensity noise of the 355 nm laser was below -110 dB/Hz in the frequency range above 200 Hz. Such a single-pass THG laser system, with its compact architecture and robustness, has great potential for applications in semiconductor manufacturing and inspection.
16 June 2026 in High Power Laser Science and Engineering
While high-power 780 nm pulsed lasers are essential for atom interferometry, scaling existing sources is restricted by nonlinear effects and material damage. In this work, we demonstrate a robust 780 nm source based on single-pass frequency doubling in a lithium triborate crystal. The source is driven by a high-power 1560 nm master oscillator fiber power amplifier. Frequency doubling is performed at a maximum fundamental power of 68.7 W, achieving an average output power of 17.2 W at 780 nm at a conversion efficiency of 25.03%. The source operates at a 10 MHz repetition rate with a pulse duration of approximately 2 ns and excellent beam quality ( M 2 ≈ 1.06). To the best of our knowledge, this represents the highest average power reported for a nanosecond 780 nm source, offering a scalable solution for high-flux quantum sensing.
21 September 2026 in Optics Express
Spectral compression performance in a phase-conjugated master oscillator power amplifier is numerically investigated using the nonlinear Schrödinger equation. The conjugated wave of a nonlinearly spectrum-broadened laser is injected as a seed source into a fiber amplifier, in which the spectral linewidth is simultaneously compressed during power amplification. As a result, stimulated Brillouin scattering in the fiber amplifier can be effectively suppressed. Comprehensive spectral and temporal analyses reveal the intrinsic nonlinear dynamics, demonstrating how the coupling between dispersion and nonlinearity alters the frequency-time profile and feeds back onto their joint dynamics. Building on these physical insights, concrete optimization strategies for linewidth compression are proposed. Requiring no electro-optic modulators, this approach offers a promising pathway for scaling narrow-linewidth fiber lasers and provides fresh perspectives on nonlinearity management in high-power laser systems.