Bisweswar Ghosh

Bisweswar Ghosh

Auto-generated profile, based on publicly available information

Bisweswar Ghosh

Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 August 2012 in Petroleum Science and Technology
Verified
Journal Article
Closed access
Emad W. Al ShalabiEmad W. Al Shalabi
Emad W. Al Shalabi
MHM. Haroun
M. Haroun
BGB. Ghosh
B. Ghosh
SPSibel Pamukcu
Sibel Pamukcu
The authors describe the effect of direct current application in conjunction with waterflood on improving flow properties of Berea sandstone cores. Single- and two-phase flow experiments are conducted on a specially designed coreflood setup, under constant electrode potential. The results showed that core permeability may increase up to 223% when hydraulic gradient and electroosmotic flow are applied in the same direction. The effect is insignificant when they work in opposite direction. It is verified from experimental results that dislodgement of clay in colloidal form, resulting increase of effective pore throat diameter improved hydraulic permeability.

3 April 2017
Verified
Conference Paper
Closed access
PDF file
JAJamiu O. Adegbite
Jamiu O. Adegbite
Emad W. Al ShalabiEmad W. Al Shalabi
Emad W. Al Shalabi
BGBisweswar Ghosh
Bisweswar Ghosh
In the field of enhanced oil recovery the engineered/low salinity water injection (EWI/LSWI) is the latest and promising development. Several mechanisms describing the EWI/LSWI process have been suggested in the literature; however, there is no consensus on a single main mechanism for its effect on oil recovery. Wettability alteration is believed to be the main reason behind the incremental oil recovery; however several other possible mechanisms are also suggested. This paper investigates the effect of engineered water injection (EWI) on oil recovery from carbonate cores. The recovery predictions are based on numerical simulations using laboratory coreflood data. The results show that heterogeneity effect on oil recovery history matching is more pronounced compared to capillary pressure effect. Moreover, an EWI model is proposed based on multi-ion exchange reactions for capturing incremental oil recovery by EWI in carbonates. The model includes other geochemical reactions, homogeneous (aqueous) and heterogeneous (precipitation/dissolution reactions), as well as the resulting wettability alteration in carbonates. Coreflood experiments are simulated and history matched using the proposed EWI model. This model can be used for oil recovery predictions and optimization in carbonate fields. This work provides more insight into the benefits of EWI and hence, supports new field applications.

4 April 2017
Verified
Conference Paper
Closed access
PDF file
AKAlibi Kilybay
Alibi Kilybay
BGBisweswar Ghosh
Bisweswar Ghosh
NTNithin Chacko Thomas
Nithin Chacko Thomas
NSNuhu Turosung Sulemana
Nuhu Turosung Sulemana
Search for an alternative, cheap and environmental friendly EOR method has resulted in the development and subsequent field implementation of Smart Water Injection (SWI) and CO2 injection (COI). Though miscible COI has multi-fold advantages, carbonated water injection (CWI) may surpass COI in terms of volume requirement and efficiency. This research work is intended to investigate the advantages of combined application of SWI & CWI in terms of reduced residual saturations in oil wet carbonate formation. In order to measure the recovery efficiency, core flooding experiments are conducted with SWI as tertiary recovery following sea water as secondary recovery mode. This is followed by quaternary recovery using carbonated smart water (CSWI), i.e. smart water saturated with CO2. Three high potential smart water compositions are screened and the best one is chosen for the recovery studies. Produced water samples are analyzed using ICP-MS. The higher recovery efficiency of CSWI are analyzed in support of the NMR porosity distribution, interfacial tension and zeta-potential studies. The underlying physical processes and the pore-scale mechanisms of fluid-fluid and fluid-solid interactions during SWI-CWI are explained in terms of surface potential, electrical double layer, oil swelling factor, droplet coalescence, wettability alteration and flow diversion due to fluid redistribution within the pore network. Core flooding results showed that tertiary recovery with SWI resulted in 4.8 - 9.5% recovery, whereas the quaternary recovery with CSWI resulted in 5.7 % to 13.6% additional oil. From this study it is established that CSWI could be a promising EOR technique among the latest EOR methods. CSWI has an advantage over COI due to the fact that it exists as a dissolved gas instead of free phase. It reduces the requirement for high pressure injection system, the problems of gravity segregation and poor sweep efficiency. A hybrid of CWI with SWI can make it an effective EOR solution with significant cost advantage, higher oil recovery in addition to the environmental benefits of CO2 sequestration.

21 June 2021
Verified
Conference Paper
Closed access
PDF file
MAMohammed Aldhuhoori
Mohammed Aldhuhoori
HBHadi Belhaj
Hadi Belhaj
BGBisweswar Ghosh
Bisweswar Ghosh
RFRyan Ivan Fernandes
Ryan Ivan Fernandes
HAHamda Alkuwaiti
Hamda Alkuwaiti
RQRabab Qaddoura
Rabab Qaddoura
A model for single-phase fluid flow in tight UCRs was previously produced by modifying the flow Forchheimer’s equation. The new modification addresses the fluid transport phenomena into three scales incorporating a diffusion term. In this study, a new liner model, numerically solved, has been developed and deployed for a gas huff and puff project. The new model has been numerically validated and verified using synthetic data and huff and puff case study. Ideally, the new model suits fluid flow in tight UCRs. The modified Forchheimer’s model presented is solved using the MATLAB numerical method for linear multiphase flow. For the huff & puff case, very simple profiles and flow dynamics of the main flow parameters have been established and a thorough parametric analysis and verifications were performed. It has been observed that the diffusion system becomes more prominent in regulating flow velocity with low permeability of the formation rock and low viscosity of the flowing fluid. The findings indicate a behavioral alignment with a previous hypothesis that matches actual reservoir behavior.

11 November 2019
Verified
Conference Paper
Closed access
PDF file
BGBisweswar Ghosh
Bisweswar Ghosh
IAIsmail AlCheikh
Ismail AlCheikh
DGDebayan Ghosh
Debayan Ghosh
SOSamuel Osisanya
Samuel Osisanya
The objectives of this study were; (1) selection of size distribution of bridging particles of polymer-based drill-in fluid based on the actual reservoir porosity distribution in order to minimize the internal filtration damage, and (2) to develop a non-corrosive wellbore cleanup fluid comprising of a specially designed bio-enzyme and in-situ organic acid precursors to remove the external filter cakes and bring the skin close to zero prior to well completion. Drill-in-fluids were formulated and developed based on Ideal Packing Theory (IPT). The calcite particle size simulation was conducted using a particle size simulator based on IPT using FMI log information from a carbonate reservoir. Xanthan-starch specific bio-enzymes were screened and optimized to achieve complete dissolution of the polymers present in the mud-cakes. Acid precursors were formulated and developed to dissolve the calcite particles and at the same time keeping the corrosion level below the maximum acceptable limit. Compatibility tests between the acid precursors and the bio-enzymes were performed. The final cleanup formulation was subjected to corrosion studies at dynamic conditions. The entire development was verified at reservoir conditions through core flooding experiments. The formulated fluid was tested successfully against ceramic disks and carbonate core plugs by performing core-flood tests. The polymer based drill-in-fluid resulted in a very low permeability filter cake (<0.1 md), preventing internal filtrate damage significantly. Deposition of a very low permeability filter cake was achieved on carbonate core plugs which results in reduced damaging invasion. Several ester hydrolysis reaction kinetics were studied and finally one combination was chosen as the suitable acid precursor, because of their ability to generate required concentration of acid within three hours of hydrolysis at downhole condition. The best acid precursor satisfied the requirements by generating 3% of acid needed after 3 hours and maintained low acid concentrations for 12 hrs. The corrosion rates were found to be significantly below the industry limits and use of acid corrosion inhibitor is not necessary. Return-permeability of mud damaged carbonate core plugs was as high as 96% after exposing to clean-up solution. A new drill-in fluid has been developed and its filter-cake deposition was completely cleaned up with enzyme-acid precursor combination. Normally wellbore cleanup fluids are highly acidic and need corrosion inhibitor. The new formulation was effective in minimizing corrosion of downhole tools without the use of corrosion inhibitors.

21 June 2021
Verified
Conference Paper
Closed access
PDF file
MAMohammed Aldhuhoori
Mohammed Aldhuhoori
HBHadi Belhaj
Hadi Belhaj
BGBisweswar Ghosh
Bisweswar Ghosh
HAHamda Alkuwaiti
Hamda Alkuwaiti
RQRabab Qaddoura
Rabab Qaddoura
The intriguing aspect of this study is to include illustrative and realistic well-based matrix to efficiently evaluate, characterize and develop Unconventional reservoirs (UCRs). This research targets a newly assessment in redefining UCRs, and developing a well-based tool to evaluate, characterize and predict the performance of tight UCRs. In this study, permeability and viscosity are used to develop the Unconventionality Index (UI) to reflect the combined causes of low mobility from UCRs. Machine learning is applied to synthesize a novel comprehensive understanding of UCRs modeling. A distinct pattern is developed for to distinguish between UCRs and CRs to show the Recovery Factor (RF) / UI dependency. Consequently, to establish such relationship, data from major UCRs producers were examined and utilized. In addition, UCRs classification matrix has been developed utilizing actual UCRs data from different reservoirs. Furthermore, a unique Unconventionality Index has been established to classify UCRs, determine reasons of unconventionality and ascertain efficient method/s of development. Subsequently, a correlation between different rock and fluid properties incorporating UI and recovery factor has been attained.