31 March 2022 in IEEE Access
An improved method of reducing the input impedance of a four-arm sinuous antenna is demonstrated for a wide gain bandwidth. The proposed antenna has a dual-linear polarized response for electronic support measures (ESM) systems and is designed with a planar substrate. The structure for reducing the input impedance is developed based on the transmission and coupled line theory and is shown to be in excellent agreement with theoretical predictions. The proposed antenna achieves an impedance bandwidth in the range of 0.45–6 GHz with a reference impedance of $100 ~\Omega $ . Simulations for comparison according to the difference in input impedance of designed antennas with feeding structures are also presented. Finally, the performance of the fabricated antenna with wideband balun is verified by measuring co- and cross-polarization radiation patterns. As a result, the proposed antenna achieves a wide gain bandwidth (>2.5 dBi) and a cross-polarization isolation (>−13 dB) of more than 12:1 in the frequency range over 0.6 GHz, which can be used in ESM systems.
25 January 2022 in IEEE Antennas and Wireless Propagation Letters
An improved method of wideband performance is demonstrated by being applied to a miniaturized four-arm log-periodic (LP)-toothed antenna with an integrated balun. The required minimum length of the integrated balun is reduced through the input impedance reduction structure on thin dielectrics with a low relative dielectric constant. In addition, destructive currents arising from the combination of the antenna structure and miniaturization structure are solved by modeling them as an equivalent circuit structure from an impedance perspective. The proposed antenna represents a voltage standing wave ratio of less than 2:1 in the 1.2518 GHz bandwidth range and has a realization gain of more than 2 dBi in the overall operating band with a diameter of 0.325_L.
25 September 2023 in IEEE Access
A novel method of enhancing radiation performance is demonstrated by applying a hybrid reflector composed of inhomogeneous metamaterial elements to a four-arm log-periodic toothed antenna. The operation of the antennas by various metamaterial cells is observed, and the causes of the radiation performance deterioration and narrow bandwidth are investigated through the field distribution analysis. The metamaterial cells are arranged in suitable positions under the antenna for good radiation performance and wide bandwidth according to AMC and EBG characteristics. In the proposed hybrid reflector, surface wave suppression characteristics are used for impedance stabilization by placing the I-shaped EBG cell under the inactive region of the antenna. The performance of the fabricated antenna with dual linear polarization capability is verified by measuring co- and cross-polarization radiation patterns. The newly proposed hybrid reflector for the four-arm log-periodic toothed antenna represents an over 4 dBi realized gain within an impedance ratio bandwidth of over 11.6:1.
12 October 2023 in IEEE Antennas and Wireless Propagation Letters
In this letter, we propose a novel design for a compact holographic antenna capable of continuous beam scanning with consistent gain from backward to forward, minimal gain degradation, and low cross-polarization. These characteristics are achieved using transversally asymmetric anisotropic unit cells that are subdivided into smaller fragments along the cross-polarization direction. The proposed unit cell possesses an asymmetric structure to suppress the open-stopband and results in stable cross-polarized surface impedance, while the co-polarized impedance changes. Consequently, the hologram pattern operates as an unmodulated impedance surface in cross-polarization, effectively reducing cross-polarized radiation. Additionally, the hologram pattern is optimized to suppress the open-stopband phenomenon, causing consistent gain in the broadside direction. We employed a distributed model to analyze the surface impedance characteristics of the proposed unit cell. The simulated and measured results are in good agreement, validating our proposed antenna design. The proposed antenna continuously scans the beam from −24° to +38° through the broadside, with a broadside gain of 13.8 dBi and gain variation of less than 3 dB within the operating frequency band of 22.2–27.0 GHz.
30 September 2024 in Journal of Electromagnetic Engineering and Science
In this paper, a hybrid checkerboard metasurface is proposed for controlling radar cross-sections (RCSs) using a small number of active devices. The proposed metasurface consists of passive and active artificial magnetic conductors. The passive metasurface contributes to reducing the RCS level owing to the dispersion characteristics of the checkerboard arrangement, while the active metasurface aids in controlling the RCS. The active RCS pattern of the proposed hybrid checkerboard metasurface in response to changes in phase distribution is also investigated. The results show that the RCS level at the boresight changed from -20.3 dBsm to 4.4 dBsm, and the main lobe of the RCS pattern steered up to 31°. The fabrication and measurement results of the proposed hybrid checkerboard metasurface are also described in this study.