25 February 2021 in Optics Express
A new process is presented for fabricating enhanced-efficiency micro-pixelated vertical-structured light-emitting diode (µVLED) arrays based on ion-implantation technology. High-resistivity selective regions are locally introduced in the n-GaN layer by ion implantation and then used as effective and non-destructive electrical isolation for realizing µVLED arrays with ultra-small pixel diameters. The implantation energy-dependent and size-dependent opto-electrical characteristics of fluorine (F-) implanted µVLED arrays are investigated systematically. The results show that the optimally designed F- ion implantation not only can achieve smaller reverse leakage current but also can realize ion-induced thermal relaxation effectively and is more suited for fabricating high-resolution µVLED arrays with higher optical output power. For the F--implanted µVLED array with pixel diameters of 10 µm, a measured output power density reaches a value of 82.1 W cm−2 at a high injection current density of 220 A cm−2, before power saturation. Further, the output power densities and external quantum efficiencies of F--implanted µVLED arrays with pixel diameters less than 10µm show strong dependences on pixel size due to the presence of defects-related SRH process. So, the high-efficiency µVLED arrays with ultra-small pixel sizes could be fabricated by an appropriately designed ion implantation combined with control of defect densities to meet the industrial requirement of microdisplay applications.
13 August 2024 in IEEE Transactions on Industrial Electronics
To decelerate the performance degradation of proton exchange membrane fuel cell (PEMFC) in long-term operation, a health management based on optimal temperature trajectory real-time optimization is proposed. To characterize the performance degradation of PEMFC system in long-term operation, the degradation mechanism of electrochemical active surface area (ECSA) for the platinum catalyst is introduced. To achieve high performance of PEMFC system at long-term operation conditions, the contradiction characteristic between health degree (HD) and efficiency must be fully considered. To characterize the relationship between HD and efficiency, a comprehensive evaluation model is proposed. To maintain high efficiency while maintaining high health life of PEMFC, the multiobjective optimization module is used to obtain the optimal temperature trajectory. A temperature dynamic feedback control is carried out by adjusting the pump flow rate to track the optimal temperature trajectory in real-time. Performance testing and comparative analysis are carried out. The final results show that compared with the conventional temperature control method, the proposed method can achieve a higher level of system efficiency output while maintaining a good health state in the long-term operation. The efficiency and longevity of the PEMFC system are improved during the whole life cycle operation.