A new process is presented for fabricating enhanced-efficiency micro-pixelated vertical-structured light-emitting diode (µVLED) arrays based on ion-implantation technology. High-resistivity selective regions are locally introduced in the n-GaN layer by ion implantation and then used as effective and non-destructive electrical isolation for realizing µVLED arrays with ultra-small pixel diameters. The implantation energy-dependent and size-dependent opto-electrical characteristics of fluorine (F-) implanted µVLED arrays are investigated systematically. The results show that the optimally designed F- ion implantation not only can achieve smaller reverse leakage current but also can realize ion-induced thermal relaxation effectively and is more suited for fabricating high-resolution µVLED arrays with higher optical output power. For the F--implanted µVLED array with pixel diameters of 10 µm, a measured output power density reaches a value of 82.1 W cm−2 at a high injection current density of 220 A cm−2, before power saturation. Further, the output power densities and external quantum efficiencies of F--implanted µVLED arrays with pixel diameters less than 10µm show strong dependences on pixel size due to the presence of defects-related SRH process. So, the high-efficiency µVLED arrays with ultra-small pixel sizes could be fabricated by an appropriately designed ion implantation combined with control of defect densities to meet the industrial requirement of microdisplay applications.
In this Letter, a new approach to fabricating a high-efficiency vertical-structured InGaN micro-pixelated light-emitting diode (μVLED) is presented. The high-resistivity selective areas are intentionally created in the n-GaN layer through a fluorine (F) ion-implantation process and then used as the electrical isolation regions for realizing a μVLED array consisting of pixels with a diameter of 10 μm. The results prove that the dual-energy ion implantations not only can improve the uniformity of carrier distribution but also can effectively prevent current from leaking along the etched sidewalls, which in turn realize a more efficient carrier injection into the mesa area. More notably, the current-handling capability and corresponding optical output power density of the μVLED array are substantially higher than those of conventional vertical-structured broad-area LEDs. A measured output light power density of the ion-implanted μVLED array reaches a maximum value of at , before power saturation. The improved luminescence performances of the μVLED array can be attributed to an effective ion-induced heat relaxation and associated lower junction temperature.
All-inorganic CsPbI3 perovskite quantum dots (PeQDs) have sparked widespread research due to their excellent optoelectronic properties and facile synthesis. However, attaining highly stable CsPbI3 perovskite quantum dots (PeQDs) against heat and polar solvents still remains a challenge and hinders any further practical application. Here, by exploiting (3-aminopropyl) triethoxysilane (APTES) as the sole silica (SiO2) precursor, we report a one-step in situ synthesis of single SiO2-coated CsPbI3 (SiO2-CsPbI3) PeQDs, namely that one SiO2 particle only contains one CsPbI3 PeQD particle. The obtained SiO2-CsPbI3 PeQDs are cubic in shape, have a more uniform size distribution, and possess narrow emission, with near unit photoluminescence quantum yields of up to 97.5%. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirm the formation of SiO2 through the hydrolysis of APTES on the CsPbI3 PeQDs surface. Furthermore, they have a significantly improved stability against storage, heat, and ethanol. By combining purple-emission GaN light-emitting diodes, the SiO2-CsPbI3 PeQDs were successfully employed as down-conversion emitters and exhibited considerable enhanced luminous performance and excellent stability, demonstrating their promising future in the practical application of solid-state lighting fields.
This work proposes a two-layer conductive split-gate MOSFET with step central implant (CI) region (TCSG-CIMOSFET), enhancing gate oxide reliability and reducing gate-drain capacitance (${C}_{\text {gd}}\text {)}$ . The P-type step CI region serves to enhance device gate oxide reliability by mitigating the maximum oxide electric field (${E}_{\text {ox}}\text {)}$ . Due to the reducing of the gate-to-drain overlapped region, TCSG-CIMOSFET has a low ${C}_{\text {gd}}$ . Furthermore, the technology of conductivity modulation is applied to TCSG-CIMOSFET, which increases channel carrier concentration to reduce the specific on-resistance (${R}_{\text {on, {sp}}}\text {)}$ . In the TCAD simulation, the TCSG-CIMOSFET improves the ${E}_{\text {ox}}$ , BFOM, ${C}_{\text {gd}}$ , HF-FOM by 50%, 43%, 45%, 49%, respectively. The enhanced performance suggests that TCSG-CIMOSFET is an excellent choice for high efficiency and high frequency power electronic applications.
GaN metal–insulator–semiconductor high electron mobility transistors (MIS-HEMTs) with scandium aluminum nitride Sc0.2Al0.8N/SiNX composite gate dielectric were demonstrated with improved device performance in terms of current density, on-resistance, breakdown voltage, gate leakage, and current collapse. GaN MIS-HEMTs with single-layer Sc0.2Al0.8N or SiNX were also fabricated as reference. Notably, the current collapse was reduced from ∼38.8% in GaN MIS-HEMTs with single-layer SiNX dielectric to ∼4.9% in the device with composite gate dielectric. The insertion of the thin SiNX layer can mitigate the surface damage due to the ScAlN sputtering process and significantly reduce the interface state density. Furthermore, the high valence band offset of Sc0.2Al0.8N/SiNX of 0.78 eV also plays a key role in the suppression of hole injection and gate leakage current. This work shows the effectiveness of the Sc0.2Al0.8N/SiNX composite gate dielectric and can serve as an important reference for future developments of high-performance reliable GaN HEMTs for power and RF electronics.